Polyamide 11 Composites with Surface-Activated Intact Mica Structures for Advanced Applications
Polymers · 27.10.2025 · 17 (21) · 2861
DOI: 10.3390/polym17212861 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 27.10.2025. Verfasst von Erika Varga und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Innovative Vehicles and Materials, GAMF Faculty of Engineering and Computer Science, John von Neumann University, 10 Izsáki Street, 600…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Recovery and Resilience Facility of the European Union.
Abstract (Originalsprache)
The present study explores the potential improvement of the mechanical properties of bio-based polyamide 11 (PA11) for demanding industrial application using natural and surface-treated mica at 1, 2 and 5 wt%. Suppressed water uptake by up to 4% was revealed with an unfavorable effect of the surface treatment. Impact strength decreased with filler content from 39.6 kJ m−2 to between 22–10 kJ m−2, while stiffness and resistance towards deformation improved: flexural modulus rose from 518.5 MPa to 596 MPa at 5 wt%-treated small particle, and elastic modulus changed from 542.7 MPa to 705.6 MPa. Particle size dependent trends were observed in crystallinity by Differential Scanning Calorimetry (DSC). Surface treatment promoted the presence of a mesophase form, which was also presented by Scanning Electron Microscopy (SEM). Dynamic Mechanical Analysis (DMA) revealed increased internal friction, temperature-dependent modifications in the elastic properties and a glass transition temperature of 36.6 °C. X-ray Diffraction (XRD) proved an unusual decrease in basal spacing of mica from 9.92 to 9.82 Å due to silanization; however, the compounding process provoked some increase again up to 10.03 Å. Results highlight a viable pathway to modify the properties of PA11 with a primarily role in the filler concentration and dimensions over the surface characteristics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Innovative Vehicles and Materials, GAMF Faculty of Engineering and Computer Science, John von Neumann University, 10 Izsáki Street, 6000 Kecskemét, Hungary.
ORCID-Profile: Erika Varga, Attila Bata, Dávid István Kis
Förderung
- Recovery and Resilience Facility of the European Union
Zitieren
APA
Varga, E., Palásti, F., Bata, A., Kis, D. I., & Tajti, F. (2025). Polyamide 11 Composites with Surface-Activated Intact Mica Structures for Advanced Applications. Polymers, 17(21), 2861. https://doi.org/10.3390/polym17212861
Vancouver
Varga E, Palásti F, Bata A, Kis DI, Tajti F. Polyamide 11 Composites with Surface-Activated Intact Mica Structures for Advanced Applications. Polymers. 2025;17(21):2861. doi:10.3390/polym17212861
BibTeX
@article{Varga2025,
author = {Varga, Erika and Palásti, Ferenc and Bata, Attila and Kis, Dávid István and Tajti, Ferenc},
title = {Polyamide 11 Composites with Surface-Activated Intact Mica Structures for Advanced Applications},
journal = {Polymers},
year = {2025},
volume = {17},
number = {21},
pages = {2861},
doi = {10.3390/polym17212861}
}
EUVIMED