EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Graphene/TiO2-Reinforced Bio-Based Polyamide 11 Hybrid Composites for Lightweight Engineering Applications

Usman Saeed, Hamad Al-Turaif, Aqeel Ahmad Taimoor, Sami Ullah Rathur, Hesham Alhumade, Muhammad Ehtisham Siddiqui

Journal of Composites Science · 05.11.2026 · 10 (11) · 596

DOI: 10.3390/jcs10110596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 05.11.2026. Verfasst von Usman Saeed und 5 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ministry of education and Deanship of Scientific Research (DSR) at King Abdulaziz University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of sustainable polymer hybrid composites combining high mechanical strength, thermal stability, and improved fire response is essential for lightweight engineering applications. The primary objective of this study was to develop bio-based polyamide 11 (PA11) hybrid composites reinforced with graphene nanoplatelets (Gr) and titanium dioxide (TiO2) particles to enhance their mechanical, thermal, and fire-response properties. Scanning electron microscopy (SEM) revealed graphene nanoplatelets and TiO2-rich particulate domains distributed within the PA11 matrix, highlighting the hybrid composite morphology and its potential contribution to improved mechanical reinforcement and thermal stability. Hybrid reinforcement enhanced crystallization and thermal stability, increasing crystallization temperature from 158.5 to 163.2 °C and crystallinity from 20.4 to 25.6%. The thermal degradation temperatures (T5%, T10%, and Tmax) increased from 384.5, 398.5, and 434 °C to 411.0, 425.0, and 459 °C, respectively. The highest hybrid loading improved Young’s modulus, yield strength, and tensile strength by approximately 40%, 48%, and 30%, respectively, while DMA demonstrated enhanced thermomechanical stability. Furthermore, peak heat release rate (pHRR) decreased from 610 to 365 W g−1, corresponding to a 40.2% reduction, while the temperature at peak heat release (TpHRR) increased from 438 to 460 °C. These findings highlight the potential of Gr/TiO2-modified bio-based PA11 hybrid composites for sustainable, lightweight engineering applications requiring enhanced mechanical integrity, thermal stability, and fire resistance.

Förderung

  • ministry of education and Deanship of Scientific Research (DSR) at King Abdulaziz University

Zitieren

APA

Saeed, U., Al-Turaif, H., Taimoor, A. A., Rathur, S. U., Alhumade, H., & Siddiqui, M. E. (2026). Graphene/TiO2-Reinforced Bio-Based Polyamide 11 Hybrid Composites for Lightweight Engineering Applications. Journal of Composites Science, 10(11), 596. https://doi.org/10.3390/jcs10110596

Vancouver

Saeed U, Al-Turaif H, Taimoor AA, Rathur SU, Alhumade H, Siddiqui ME. Graphene/TiO2-Reinforced Bio-Based Polyamide 11 Hybrid Composites for Lightweight Engineering Applications. Journal of Composites Science. 2026;10(11):596. doi:10.3390/jcs10110596

BibTeX
@article{Saeed2026,
  author = {Saeed, Usman and Al-Turaif, Hamad and Taimoor, Aqeel Ahmad and Rathur, Sami Ullah and Alhumade, Hesham and Siddiqui, Muhammad Ehtisham},
  title = {Graphene/TiO2-Reinforced Bio-Based Polyamide 11 Hybrid Composites for Lightweight Engineering Applications},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {596},
  doi = {10.3390/jcs10110596}
}
Kostenlos starten →