EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions

Francisco Briones, Barbara Valverde iD, Ricardo Donaire, Álvaro González iD, Federico Antico iD, Carola Martínez iD

Polymers · 22.10.2025 · 17 (21) · 2812

DOI: 10.3390/polym17212812 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.10.2025. Verfasst von Francisco Briones und 5 weiteren Autor:innen. Beteiligte Einrichtung: Escuela de Ingeniería Mecánica, Pontificia Universidad Católica de Valparaíso, Valparaíso 2490000, Chile. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pontificia Universidad Católica de Valparaíso, Universidad Católica de Valparaíso.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the effect of printing orientation on the wear resistance of 3D-printed nylon fabricated via Fused Deposition Modeling (FDM). We conducted abrasive wear resistance tests, thermal analysis, and microstructural characterization using scanning electron microscopy before and after wear testing. The results show that alternating printing directions lead to significantly higher wear. Under a normal load of 130 N, this configuration caused the exposure of up to four layers. At the same time, single-orientation prints exhibit lower material loss and better filament cohesion. DSC analysis reveals that all printed samples, regardless of wear exposure, display dual melting temperatures (Ts1 and Ts2) due to distinct crystalline phase formations. Abrasion decreases the secondary melting temperature (Ts2) and increases enthalpy by up to 144% compared to unprinted nylon, highlighting the thermal history on structural properties. These findings emphasize the critical role of printing configurations in optimizing the tribological performance of 3D-printed nylon for industrial applications.

Schlagwörter

Stichwörter der Autor:innen

abrasive wearnylonprinting orientationthermal modification

Autor:innen und Institutionen

  • Escuela de Ingeniería Mecánica, Pontificia Universidad Católica de Valparaíso, Valparaíso 2490000, Chile.
  • Facultad de Ingeniería y Ciencias, Universidad Adolfo Ibáñez, Viña del Mar 2562340, Chile.
  • Departamento de Ingeniería en Obras Civiles, Universidad de La Frontera, Temuco 4811230, Chile.

ORCID-Profile: Barbara Valverde, Álvaro González, Federico Antico, Carola Martínez

Förderung

  • Pontificia Universidad Católica de Valparaíso
  • Universidad Católica de Valparaíso

Zitieren

APA

Briones, F., Valverde, B., Donaire, R., González, Á., Antico, F., & Martínez, C. (2025). Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions. Polymers, 17(21), 2812. https://doi.org/10.3390/polym17212812

Vancouver

Briones F, Valverde B, Donaire R, González Á, Antico F, Martínez C. Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions. Polymers. 2025;17(21):2812. doi:10.3390/polym17212812

BibTeX
@article{Briones2025,
  author = {Briones, Francisco and Valverde, Barbara and Donaire, Ricardo and González, Álvaro and Antico, Federico and Martínez, Carola},
  title = {Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {21},
  pages = {2812},
  doi = {10.3390/polym17212812}
}
Kostenlos starten →