Thermal and Mechanical Performance of Maleic Anhidride/Benzoyl Peroxide-Modified PLA/PCL Biocomposites
Polymers · 19.09.2025 · 17 (18) · 2540
DOI: 10.3390/polym17182540 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 19.09.2025. Verfasst von Aritz Unamuno Garay und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Materials Engineering, Universitat Politècnica de València (UPV), Plz. Ferrándiz y Carbonell, s/n, 03801 Alcoy, Spain. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MCIN/AEI/10.13039/501100011033, Agencia Estatal de Investigación.
Abstract (Originalsprache)
This study investigated PLA/PCL blends modified with maleic anhydride (MA) via radical grafting using benzoyl peroxide (BPO) as an initiator. Different formulations with 5 and 10 wt.% of PLA-g-MA (containing 1, 3, and 5 wt.% MA) were prepared to evaluate their compatibilizing effect. Samples were characterized thermally, mechanically, and morphologically using DSC, TGA, FTIR, goniometry, SEM, and tensile, impact, and hardness tests. The results show that adding PCL significantly improves the ductility of PLA, though it reduces tensile strength and hardness. Grafting with MA partially improves phase compatibility, as seen by increased elongation at break and impact resistance, especially at intermediate MA concentrations (1–3%). However, higher MA contents lead to greater variability in thermal and mechanical results, likely due to heterogeneous phase dispersion. FTIR analysis detected residual BPO in some formulations, though below 0.1 phr. TGA indicated a slight improvement in thermal stability at 5 wt.% MA. Overall, the findings suggest that controlled use of MA as a compatibilizer enhances the balance of mechanical and thermal properties in PLA/PCL systems.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Materials Engineering, Universitat Politècnica de València (UPV), Plz. Ferrándiz y Carbonell, s/n, 03801 Alcoy, Spain.
ORCID-Profile: Aritz Unamuno Garay, Alexandra Llidó Barragán, Santiago Ferrandiz-Bou, Maria Dolores Samper
Förderung
- MCIN/AEI/10.13039/501100011033
- Agencia Estatal de Investigación
Zitieren
APA
Unamuno Garay, A., Llidó Barragán, A., Ferrandiz-Bou, S., & Samper, M. D. (2025). Thermal and Mechanical Performance of Maleic Anhidride/Benzoyl Peroxide-Modified PLA/PCL Biocomposites. Polymers, 17(18), 2540. https://doi.org/10.3390/polym17182540
Vancouver
Unamuno Garay A, Llidó Barragán A, Ferrandiz-Bou S, Samper MD. Thermal and Mechanical Performance of Maleic Anhidride/Benzoyl Peroxide-Modified PLA/PCL Biocomposites. Polymers. 2025;17(18):2540. doi:10.3390/polym17182540
BibTeX
@article{UnamunoGaray2025,
author = {Unamuno Garay, Aritz and Llidó Barragán, Alexandra and Ferrandiz-Bou, Santiago and Samper, Maria Dolores},
title = {Thermal and Mechanical Performance of Maleic Anhidride/Benzoyl Peroxide-Modified PLA/PCL Biocomposites},
journal = {Polymers},
year = {2025},
volume = {17},
number = {18},
pages = {2540},
doi = {10.3390/polym17182540}
}
EUVIMED