EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and thermal characterization of additive manufactured fish scale powder reinforced PLA biocomposites

A Joseph Arockiam, S Rajesh, S Karthikeyan, Senthil Muthu Kumar Thiagamani, R G Padmanabhan, Mohamed Hashem, Hassan Fouad, AbuZar Ansari

Materials Research Express · 01.07.2023 · 10 (7) · 075504

DOI: 10.1088/2053-1591/ace41d ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Research Express, online erschienen am 12.07.2023. Verfasst von A Joseph Arockiam und 7 weiteren Autor:innen. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University, Researcher supporting project, Riyadh, Saudi Arabia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research work is aimed to convert fish scale wastes as an effective reinforcement in polylactic acid (PLA) as a new bio-composite filament for fused deposition-based 3D printing applications. Various concentrations of fish scale particles (0, 10, 20, and 30%) were used to make the filaments. The performance of the developed filaments was assessed by printing the filament into various test specimens to perform tensile, flexural, impact, hardness, and water absorption experiments as per the ASTM standards. The outcomes of the results show that the PLA/fish scale powder (20%) composite has performed well than the remaining composites. Furthermore, the adding 20% fish scale powder increased the tensile strength and flexural strength of the 3D printed PLA composite by 15% and 39.78% respectively. This is evident that the novel bio-composite exhibited better properties than the pure polymer making it a potential replacement as bone-grafting material and scaffolds for bio-engineering applications.

Förderung

  • King Saud University, Researcher supporting project, Riyadh, Saudi Arabia

Zitieren

APA

Arockiam, A. J., Rajesh, S., Karthikeyan, S., Thiagamani, S. M. K., Padmanabhan, R. G., Hashem, M., Fouad, H., & Ansari, A. (2023). Mechanical and thermal characterization of additive manufactured fish scale powder reinforced PLA biocomposites. Materials Research Express, 10(7), 075504. https://doi.org/10.1088/2053-1591/ace41d

Vancouver

Arockiam AJ, Rajesh S, Karthikeyan S, Thiagamani SMK, Padmanabhan RG, Hashem M, et al. Mechanical and thermal characterization of additive manufactured fish scale powder reinforced PLA biocomposites. Materials Research Express. 2023;10(7):075504. doi:10.1088/2053-1591/ace41d

BibTeX
@article{Arockiam2023,
  author = {Arockiam, A Joseph and Rajesh, S and Karthikeyan, S and Thiagamani, Senthil Muthu Kumar and Padmanabhan, R G and Hashem, Mohamed and Fouad, Hassan and Ansari, AbuZar},
  title = {Mechanical and thermal characterization of additive manufactured fish scale powder reinforced PLA biocomposites},
  journal = {Materials Research Express},
  year = {2023},
  volume = {10},
  number = {7},
  pages = {075504},
  doi = {10.1088/2053-1591/ace41d}
}
Kostenlos starten →