EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Shock Response Characteristics and Equation of State of High-Mass-Fraction Pressed Tungsten Powder/Polytetrafluoroethylene-Based Composites

Wei Zhu, Weihang Li, Wenbin Li, Xiaoming Wang, Wenjin Yao

Polymers · 26.08.2025 · 17 (17) · 2309

DOI: 10.3390/polym17172309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.08.2025. Verfasst von Wei Zhu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, Doctor of Innovation and Entrepreneurship in Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tungsten powder/polytetrafluoroethylene (W/PTFE) composites have the potential to replace traditional metallic materials as casings for controllable power warheads. Under explosive loading, they generate high-density and relatively uniformly distributed metal powder particles, thereby enhancing close-range impact effects while reducing collateral damage. To characterize the material’s response under impact loading, plate impact tests were conducted to investigate the effects of tungsten content (70 wt%, 80 wt%, and 90 wt%) and tungsten particle size (200 μm, 400 μm, and 600 μm) on the impact behavior of the composites. The free surface velocity histories of the target plates were measured using a 37 mm single-stage light gas gun and a full-fiber laser interferometer (DISAR), enabling the determination of the shock velocity–particle velocity relationship to establish the equation of state. Experimental data show a linear relationship between shock velocity and particle velocity, with the 80 wt% and 90 wt% composites exhibiting similar shock velocities. The fitted slope increases from 2.792 to 2.957 as the tungsten mass fraction rises from 70 wt% to 90 wt%. With particle size increasing from 200 μm to 600 μm, the slope decreases from 3.204 to 2.756, while c0 increases from 224.7 to 633.3. Comparison of the Hugoniot pressure curves of different specimens indicated that tungsten content significantly affects the impact behavior, whereas variations in tungsten particle size have a negligible influence on the Hugoniot pressure. A high tungsten content with small particle size (e.g., 90 wt% with ~200 μm) improves the overall compressive properties of composite materials. Based on the experimental results, a mesoscale finite element model consistent with the tests was developed. The overall error between the numerical simulations and experimental results was less than 5% under various conditions, thereby validating the accuracy of the model. Numerical simulations revealed the coupling mechanism between tungsten particle plastic deformation and matrix flow. The strong rarefaction unloading effect initiated at the composite’s free surface caused matrix spallation and jetting. Multiple wave systems were generated at the composite–copper interface, whose interference and coupling ultimately resulted in a nearly uniform macroscopic pressure field.

Schlagwörter

Stichwörter der Autor:innen

equation of statemesoscale simulationplate impact testshock responsetungsten/polytetrafluoroethylene composites

Autor:innen und Institutionen

  • School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • Doctor of Innovation and Entrepreneurship in Jiangsu Province

Zitieren

APA

Zhu, W., Li, W., Li, W., Wang, X., & Yao, W. (2025). Shock Response Characteristics and Equation of State of High-Mass-Fraction Pressed Tungsten Powder/Polytetrafluoroethylene-Based Composites. Polymers, 17(17), 2309. https://doi.org/10.3390/polym17172309

Vancouver

Zhu W, Li W, Li W, Wang X, Yao W. Shock Response Characteristics and Equation of State of High-Mass-Fraction Pressed Tungsten Powder/Polytetrafluoroethylene-Based Composites. Polymers. 2025;17(17):2309. doi:10.3390/polym17172309

BibTeX
@article{Zhu2025,
  author = {Zhu, Wei and Li, Weihang and Li, Wenbin and Wang, Xiaoming and Yao, Wenjin},
  title = {Shock Response Characteristics and Equation of State of High-Mass-Fraction Pressed Tungsten Powder/Polytetrafluoroethylene-Based Composites},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {17},
  pages = {2309},
  doi = {10.3390/polym17172309}
}
Kostenlos starten →