Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites
Micromachines · 28.07.2024 · 15 (8) · 966
DOI: 10.3390/mi15080966 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 28.07.2024. Verfasst von Hua Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 131 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
In high-tech areas such as nuclear fusion, aerospace, and high-performance tools, tungsten and its alloys are indispensable due to their high melting point, low thermal expansion, and excellent mechanical properties. The rise of Additive Manufacturing (AM) technologies, particularly Laser Powder Bed Fusion (L-PBF), has enabled the precise and rapid production of complex tungsten parts. However, cracking and densification remain major challenges in printing tungsten samples, and considerable efforts have been made to study how various processing conditions (such as laser power, scanning strategy, hatch spacing, scan speed, and substrate preheating) affect print quality. In this review, we comprehensively discuss various critical processing parameters and the impact of oxygen content on the control of the additive manufacturing process and the quality of the final parts. Additionally, we introduce additive manufacturing-compatible W materials (pure W, W alloys, and W-based composites), summarize the differences in their mechanical properties, densification, and microstructure, and further provide a clear outlook for developing additive manufactured W materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China.
- Key Laboratory of Construction Hydraulic Robots of Anhui Higher Education Institutes, Tongling University, Tongling 244061, China.
- Institute of Additive Manufacturing, Jiangxi University of Science and Technology, Nanchang 330013, China.
ORCID-Profile: Dongsheng Wang
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, H., Shen, Y., Wu, X., Wang, D., & Yang, Y. (2024). Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites. Micromachines, 15(8), 966. https://doi.org/10.3390/mi15080966
Vancouver
Li H, Shen Y, Wu X, Wang D, Yang Y. Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites. Micromachines. 2024;15(8):966. doi:10.3390/mi15080966
BibTeX
@article{Li2024,
author = {Li, Hua and Shen, Yun and Wu, Xuehua and Wang, Dongsheng and Yang, Youwen},
title = {Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {8},
pages = {966},
doi = {10.3390/mi15080966}
}
EUVIMED