EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Multiple Mechanical Recycling Cycles via Semi-Industrial Twin-Screw Extrusion on the Properties of Polybutylene Succinate (PBS)

Vito Gigante iD, Laura Aliotta iD, Luigi Botta iD, Irene Bavasso iD, Alessandro Guzzini iD, Serena Gabrielli iD, Fabrizio Sarasini iD, Jacopo Tirillò iD, Andrea Lazzeri iD

Polymers · 11.07.2025 · 17 (14) · 1918

DOI: 10.3390/polym17141918 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.07.2025. Verfasst von Vito Gigante und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Industrial Engineering, University of Pisa, 56122 Pisa, Italy. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Italian Ministry of University and Research (MUR), European Union—NextGenerationEU—Project Title CellBioReComp.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of repeated mechanical recycling on the structural, thermal, mechanical, and aesthetic properties of poly(butylene succinate) (PBS), a commercially available bio-based and biodegradable aliphatic polyester. PBS production scraps were subjected to five consecutive recycling cycles through semi-industrial extrusion compounding followed by injection molding to simulate realistic mechanical reprocessing conditions. Melt mass-flow rate (MFR) analysis revealed a progressive increase in melt fluidity. Initially, the trend of viscosity followed the melt flow rate; however, increasing the reprocessing number (up to 5) resulted in a partial recovery of viscosity, which was caused by chain branching mechanisms. The phenomenon was also confirmed by data of molecular weight evaluation. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) confirmed the thermal stability of the polymer, with minimal shifts in glass transition, crystallization, and degradation temperatures during the reprocessing cycles. Tensile tests revealed a slight reduction in strength and stiffness, but an increase in elongation at break, indicating improved ductility. Impact resistance declined moderately from 8.7 to 7.3 kJ/m2 upon reprocessing; however, it exhibited a pronounced reduction to 1.8 kJ/m2 at −50 °C, reflecting brittle behavior under sub-ambient conditions. Despite these variations, PBS maintained excellent color stability (ΔE < 1), ensuring aesthetic consistency while retaining good mechanical and thermal properties.

Schlagwörter

Stichwörter der Autor:innen

extrusioninjection moldingmechanical recyclingpolybutylene succinate (PBS)production scraps

Autor:innen und Institutionen

  • Department of Civil and Industrial Engineering, University of Pisa, 56122 Pisa, Italy.
  • Department of Engineering, University of Palermo, 90128 Palermo, Italy.
  • Department of Chemical Engineering Materials Environment, Sapienza University of Rome, 00184 Roma, Italy.
  • ChIP Building, School of Science and Technology, University of Camerino, 62032 Camerino, Italy.

ORCID-Profile: Vito Gigante, Laura Aliotta, Luigi Botta, Irene Bavasso, Alessandro Guzzini, Serena Gabrielli, Fabrizio Sarasini, Jacopo Tirillò, Andrea Lazzeri

Förderung

  • Italian Ministry of University and Research (MUR)
  • European Union—NextGenerationEU—Project Title CellBioReComp

Zitieren

APA

Gigante, V., Aliotta, L., Botta, L., Bavasso, I., Guzzini, A., Gabrielli, S., Sarasini, F., Tirillò, J., & Lazzeri, A. (2025). Impact of Multiple Mechanical Recycling Cycles via Semi-Industrial Twin-Screw Extrusion on the Properties of Polybutylene Succinate (PBS). Polymers, 17(14), 1918. https://doi.org/10.3390/polym17141918

Vancouver

Gigante V, Aliotta L, Botta L, Bavasso I, Guzzini A, Gabrielli S, et al. Impact of Multiple Mechanical Recycling Cycles via Semi-Industrial Twin-Screw Extrusion on the Properties of Polybutylene Succinate (PBS). Polymers. 2025;17(14):1918. doi:10.3390/polym17141918

BibTeX
@article{Gigante2025,
  author = {Gigante, Vito and Aliotta, Laura and Botta, Luigi and Bavasso, Irene and Guzzini, Alessandro and Gabrielli, Serena and Sarasini, Fabrizio and Tirillò, Jacopo and Lazzeri, Andrea},
  title = {Impact of Multiple Mechanical Recycling Cycles via Semi-Industrial Twin-Screw Extrusion on the Properties of Polybutylene Succinate (PBS)},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {14},
  pages = {1918},
  doi = {10.3390/polym17141918}
}
Kostenlos starten →