EUVIMEDEUVIMED entdecken
Crossref

Mechanical recycling of PLA : Effect of weathering, extrusion cycles, and chain extender

Tomás Ramos‐Hernández, Jorge Ramón Robledo‐Ortíz, Martín Esteban González‐López, Alan Salvador Martín del Campo, Rubén González‐Núñez, Denis Rodrigue, Aida Alejandra Pérez Fonseca

Journal of Applied Polymer Science · 20.04.2023 · 140 (16)

DOI: 10.1002/app.53759 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 17.02.2023. Verfasst von Tomás Ramos‐Hernández und 6 weiteren Autor:innen. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Consejo Nacional de Ciencia y Tecnología.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work evaluated the reprocessing of PLA with a high melt flow index (MFI). PLA samples were prepared by extrusion using a chain extender (Joncryl ADR‐4368) and subjected to two additional extrusion cycles with or without exposure to accelerated weathering. The results showed drastic affectations of PLA properties by weathering. The MFI increased from 65 to 137 g/10 min by reprocessing, while reprocessed and weathered samples reached a MFI of 417 g/10 min after three extrusion cycles. The addition of Joncryl prevented PLA degradation (MFI of 170 g/10 min after three extrusion cycles, even when weathering was performed). Additionally, the tensile strengths of weathered samples were substantially decreased (67%) compared to only reprocessed samples (14%). In this sense, PLA mechanical recycling is a good alternative if it is not exposed to harsh weathering conditions, in which case a chain extender is needed to get reasonable properties. Otherwise, reprocessing accelerated the composting of PLA, and the chain extender addition did not limit it.

Förderung

  • Consejo Nacional de Ciencia y Tecnología

Zitieren

APA

Ramos‐Hernández, T., Robledo‐Ortíz, J. R., González‐López, M. E., Campo, A. S. M. D., González‐Núñez, R., Rodrigue, D., & Fonseca, A. A. P. (2023). Mechanical recycling of PLA : Effect of weathering, extrusion cycles, and chain extender. Journal of Applied Polymer Science, 140(16). https://doi.org/10.1002/app.53759

Vancouver

Ramos‐Hernández T, Robledo‐Ortíz JR, González‐López ME, Campo ASMD, González‐Núñez R, Rodrigue D, et al. Mechanical recycling of PLA : Effect of weathering, extrusion cycles, and chain extender. Journal of Applied Polymer Science. 2023;140(16). doi:10.1002/app.53759

BibTeX
@article{RamosHernndez2023,
  author = {Ramos‐Hernández, Tomás and Robledo‐Ortíz, Jorge Ramón and González‐López, Martín Esteban and Campo, Alan Salvador Martín del and González‐Núñez, Rubén and Rodrigue, Denis and Fonseca, Aida Alejandra Pérez},
  title = {Mechanical recycling of PLA : Effect of weathering, extrusion cycles, and chain extender},
  journal = {Journal of Applied Polymer Science},
  year = {2023},
  volume = {140},
  number = {16},
  doi = {10.1002/app.53759}
}
Kostenlos starten →