Mechanical Properties of Dual-Layer Electrospun Fiber Mats
Polymers · 26.06.2025 · 17 (13) · 1777
DOI: 10.3390/polym17131777 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.06.2025. Verfasst von Ioana Caloian und 5 weiteren Autor:innen. Beteiligte Einrichtung: Chemical and Life Science Engineering, Virginia Commonwealth University, Richmond, VA 23284, USA. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DEVCOM, U.S. Army Combat Capabilities Development Command Soldier Center.
Abstract (Originalsprache)
Electrospinning with sequential layer deposition has been reported for various applications such as tissue scaffolds, shape memory materials, and separations. However, the effect of layering on the mechanical properties is not fully understood. In this work, layered structures of thermoplastic polyurethane (TPU) and nylon were selected as a model system to investigate the effect of sequential layer deposition on mechanical properties. Evidence of the layered structure was indicated by scanning electron microscopy (SEM) and Fourier Transform Infrared spectroscopy (FTIR) experiments. Layering TPU with nylon resulted in a 60-fold increase in the Young’s modulus. The Young’s modulus of the layered structure was reasonably predicted by the Voigt rule of mixtures. Furthermore, the Young’s modulus changes without any statistically significant change in elongation at break compared to a single layer of nylon. Thus, the elongation at break was dictated by the stiffer material, despite being present at a lower volume fraction. Overall, electrospinning with sequential layer deposition electrospinning is an effective approach for tuning the mechanical properties and surface chemistry of electrospun materials independently, which may be of interest for applications in tissue engineering and separations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chemical and Life Science Engineering, Virginia Commonwealth University, Richmond, VA 23284, USA.
- U.S. Army Combat Capabilities Development Command Soldier Center, Natick, MA 01760, USA.
ORCID-Profile: Bhalaji Yadav Kantepalle, Timothy J Lawton, Christina Tang
Förderung
- DEVCOM
- U.S. Army Combat Capabilities Development Command Soldier Center
Zitieren
APA
Caloian, I., Trapp, J., Kantepalle, B. Y., Latimer, P., Lawton, T. J., & Tang, C. (2025). Mechanical Properties of Dual-Layer Electrospun Fiber Mats. Polymers, 17(13), 1777. https://doi.org/10.3390/polym17131777
Vancouver
Caloian I, Trapp J, Kantepalle BY, Latimer P, Lawton TJ, Tang C. Mechanical Properties of Dual-Layer Electrospun Fiber Mats. Polymers. 2025;17(13):1777. doi:10.3390/polym17131777
BibTeX
@article{Caloian2025,
author = {Caloian, Ioana and Trapp, Jocelyn and Kantepalle, Bhalaji Yadav and Latimer, Patrick and Lawton, Timothy J and Tang, Christina},
title = {Mechanical Properties of Dual-Layer Electrospun Fiber Mats},
journal = {Polymers},
year = {2025},
volume = {17},
number = {13},
pages = {1777},
doi = {10.3390/polym17131777}
}
EUVIMED