EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of In Vitro Degradation on the Properties of Polylactic Acid Electrospun Fiber Mats

Kardo Abdullah, Kolos Molnár

Fibers · 28.12.2024 · 13 (1) · 1

DOI: 10.3390/fib13010001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fibers, online erschienen am 28.12.2024. Verfasst von Kardo Abdullah und 1 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research, Development and Innovation Office, Ministry of Culture and Innovation of Hungary from the National Research, Development and Innovation Fund, European Union.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The scope of our study was to investigate the changes in electrospun polylactic acid (PLA) fiber mats’ morphological, mechanical, and thermal properties in vitro. We electrospun two sets of PLA fiber mats with different average diameters, E6 (747 nm) and E10 (1263 nm). The degradation study of PLA electrospun fibers was carried out in phosphate-buffered saline solution at 37 °C to simulate conditions within the human system. The results reveal the thicker fibers (E10) degraded more rapidly than the E6 sample due to their different morphology. E10 showed a 29% reduction in diameter and a 41% weight loss, while E6 exhibited an 18% reduction in diameter and a 27.5% weight loss. E6’s Young’s modulus increased by 3.55 times, while E10’s rose by 2.23 times after 28 days of degradation, and the fibers became more rigid. E6 showed a more pronounced decrease in crystallinity compared with E10. Changes in electrospun fiber diameters and crystallinity greatly influence the degradation mechanism of PLA.

Förderung

  • National Research, Development and Innovation Office
  • Ministry of Culture and Innovation of Hungary from the National Research, Development and Innovation Fund
  • European Union

Zitieren

APA

Abdullah, K., & Molnár, K. (2024). The Influence of In Vitro Degradation on the Properties of Polylactic Acid Electrospun Fiber Mats. Fibers, 13(1), 1. https://doi.org/10.3390/fib13010001

Vancouver

Abdullah K, Molnár K. The Influence of In Vitro Degradation on the Properties of Polylactic Acid Electrospun Fiber Mats. Fibers. 2024;13(1):1. doi:10.3390/fib13010001

BibTeX
@article{Abdullah2024,
  author = {Abdullah, Kardo and Molnár, Kolos},
  title = {The Influence of In Vitro Degradation on the Properties of Polylactic Acid Electrospun Fiber Mats},
  journal = {Fibers},
  year = {2024},
  volume = {13},
  number = {1},
  pages = {1},
  doi = {10.3390/fib13010001}
}
Kostenlos starten →