EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

From Waste to Function: Compatibilized r-PET/r-HDPE Blends for Pellet Extrusion 3D Printing

Seyed Amir Ali Bozorgnia Tabary iD, Jean-Pierre Bresse, Haniyeh Ramona Fayazfar iD

Polymers · 12.06.2025 · 17 (12) · 1638

DOI: 10.3390/polym17121638 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.06.2025. Verfasst von Seyed Amir Ali Bozorgnia Tabary und 2 weiteren Autor:innen. Beteiligte Einrichtung: Eco-Friendly Circular Advanced Materials and Additive Manufacturing Lab, Department of Mechanical and Manufacturing Engineering, Ontario Tech Univers…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSERC Discovery grant, Ontario Tech Start Up grant.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing accumulation of plastic waste—especially from packaging and post-consumer sources—calls for the development of sustainable recycling strategies. Due to the challenges associated with sorting mixed waste, directly processing waste streams offers a practical approach. Polyethylene terephthalate (PET) and high-density polyethylene (HDPE) are common consumer plastics, but they are difficult to recycle together due to immiscibility and degradation. In mixed waste, recycled HDPE (r-HDPE) often contaminates the recycled PET (r-PET) stream. Additive manufacturing (AM) offers a promising solution to upcycle these mixed polymers into functional products with minimal waste. This study investigates the processing and characterization of r-PET/r-HDPE blends for AM, focusing on the role of compatibilizers in enhancing their properties. Blends were melt-compounded using a twin-screw extruder to improve dispersion, followed by direct pellet-based 3D printing. A compatibilizer (0–7 php) was incorporated to improve miscibility. Rheological testing showed that the 5 php compatibilizer optimized viscosity and elasticity, ensuring smoother extrusion. Thermal analysis revealed a 30 °C increase in crystallization temperature and a shift in decomposition temperature from 370 °C to 400 °C, indicating improved thermal stability. Mechanical testing showed a tensile strength of 35 MPa and 17% elongation at break at optimal loading. Scanning electron microscopy (SEM) confirmed reduced phase separation and improved morphology. This work demonstrates that properly compatibilized r-PET/r-HDPE blends enable sustainable 3D printing without requiring polymer separation. The results highlight a viable path for the conversion of plastic waste into high-value, customizable components, contributing to landfill reduction and advancing circular economy practices in polymer manufacturing.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingcircular economycompatibilizationrecycling

Autor:innen und Institutionen

  • Eco-Friendly Circular Advanced Materials and Additive Manufacturing Lab, Department of Mechanical and Manufacturing Engineering, Ontario Tech University, Oshawa, ON L1G 0C5, Canada.

ORCID-Profile: Seyed Amir Ali Bozorgnia Tabary, Haniyeh Ramona Fayazfar

Förderung

  • NSERC Discovery grant
  • Ontario Tech Start Up grant

Zitieren

APA

Bozorgnia Tabary, S. A. A., Bresse, J. P., & Fayazfar, H. R. (2025). From Waste to Function: Compatibilized r-PET/r-HDPE Blends for Pellet Extrusion 3D Printing. Polymers, 17(12), 1638. https://doi.org/10.3390/polym17121638

Vancouver

Bozorgnia Tabary SAA, Bresse JP, Fayazfar HR. From Waste to Function: Compatibilized r-PET/r-HDPE Blends for Pellet Extrusion 3D Printing. Polymers. 2025;17(12):1638. doi:10.3390/polym17121638

BibTeX
@article{BozorgniaTabary2025,
  author = {Bozorgnia Tabary, Seyed Amir Ali and Bresse, Jean-Pierre and Fayazfar, Haniyeh Ramona},
  title = {From Waste to Function: Compatibilized r-PET/r-HDPE Blends for Pellet Extrusion 3D Printing},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {12},
  pages = {1638},
  doi = {10.3390/polym17121638}
}
Kostenlos starten →