EUVIMEDEUVIMED entdecken
Crossref

Development of 3D printing filament from recycled HDPE injection waste

Tilly Zi Li Khoo, Ming Yeng Chan, Seong Chun Koay, Thai Kiat Ong, Shuh Huey Ho

Green Materials · 23.03.2026 · 1-9

DOI: 10.1680/jgrma.25.00202 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Green Materials, online erschienen am 23.03.2026. Verfasst von Tilly Zi Li Khoo und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study focused on the fabrication and characterization of three-dimensional (3D) printing filament produced from high-density polyethylene waste (rHDPE). The rHDPE was sourced from injection-moulded waste such as sprues, gates and runners. Due to the unsuitability of injection grade of polymer for extrusion process, injection-grade rHDPE was blended with extrusion-grade high-density polyethylene (HDPE) materials. Different blend ratios of injection-grade rHDPE to extrusion-grade HDPE (100:0, 60:40, 50:50, and 40:60) were prepared and extruded into 3D printing filaments. The filament characterization including filament diameter consistency, filament ovality, and melt flow index were evaluated, while the thermal stability of the blends was analysed using thermogravimetric analysis. Among the blend ratios, the 50:50 (injection-grade rHDPE: extrusion-grade HDPE) blend demonstrated the starting ratio for producing 3D printing filament with consistent filament diameter and was therefore selected for 3D printing tensile specimens for tensile testing, indicating its suitability for 3D printing applications. Tensile specimens printed from this 50:50 blend ratio filament were tested at three different infill densities (20%, 60%, and 100%). Furthermore, the tensile properties of 3D-printed parts printed from 50:50 rHDPE blend filament were compared with those of commercial virgin polylactic acid, polyethylene terephthalate glycol, and HDPE filaments.

Zitieren

APA

Khoo, T. Z. L., Chan, M. Y., Koay, S. C., Ong, T. K., & Ho, S. H. (2026). Development of 3D printing filament from recycled HDPE injection waste. Green Materials, 1-9. https://doi.org/10.1680/jgrma.25.00202

Vancouver

Khoo TZL, Chan MY, Koay SC, Ong TK, Ho SH. Development of 3D printing filament from recycled HDPE injection waste. Green Materials. 2026:1-9. doi:10.1680/jgrma.25.00202

BibTeX
@article{Khoo2026,
  author = {Khoo, Tilly Zi Li and Chan, Ming Yeng and Koay, Seong Chun and Ong, Thai Kiat and Ho, Shuh Huey},
  title = {Development of 3D printing filament from recycled HDPE injection waste},
  journal = {Green Materials},
  year = {2026},
  pages = {1--9},
  doi = {10.1680/jgrma.25.00202}
}
Kostenlos starten →