Effect of Printing Parameters on the Dynamic Characteristics of Additively Manufactured ABS Beams: An Experimental Modal Analysis and Response Surface Methodology
Polymers · 10.06.2025 · 17 (12) · 1615
DOI: 10.3390/polym17121615 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.06.2025. Verfasst von Hilal Doğanay Kati und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Life-Cycle Engineering and Management, Faculty of Engineering and Applied Sciences, Cranfield University, Bedford MK43 0AL, UK. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the dynamic characteristics of three-dimensional (3D) printed acrylonitrile butadiene styrene (ABS) cantilever beams using Experimental Modal Analysis (EMA). The effects of Fused Deposition Modelling (FDM) process parameters—specifically infill pattern, infill density, nozzle size, and raster angle—on the natural frequency, mode shapes, and damping ratio were examined. Although numerous studies have addressed the static mechanical behaviour of FDM parts, there remains a significant gap in understanding how internal structural features and porosity influence their vibrational response. To address this, a total of seventy-two specimens were fabricated with varying parameter combinations, and their dynamic responses were evaluated through frequency response functions (FRFs) obtained via the impact hammer test. Damping characteristics were extracted using the peak-picking (half power) method. Additionally, the influence of internal porosity on damping behaviour was assessed by comparing the actual and theoretical masses of the specimens. The findings indicate that both natural frequencies and damping ratios are strongly influenced by the internal structure of the printed components. In particular, gyroid and cubic infill patterns increased structural stiffness and resulted in higher resonant frequencies, while low infill densities and triangle patterns contributed to enhanced damping capacity. Response Surface Methodology (RSM) was employed to develop mathematical models describing the parameter effects, providing predictive tools for applications sensitive to vibration. The high R2 values obtained in the RSM models based on the input variables show that these variables explain the effects of these variables on both natural frequency and damping ratio with high accuracy. The models developed (with R2 values up to 0.98) enable the prediction of modal behaviour, providing a valuable design tool for engineers optimizing vibration-sensitive components in fields such as aerospace, automotive, and electronics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre for Life-Cycle Engineering and Management, Faculty of Engineering and Applied Sciences, Cranfield University, Bedford MK43 0AL, UK.
- Faculty of Engineering and Natural Sciences, Department of Mechanical Engineering, Bursa Technical University, Bursa 16310, Turkey.
- Mechanical Engineering Department, Engineering College, Northern Border University, King Fahad Road, Arar 92341, Saudi Arabia.
ORCID-Profile: Hilal Doğanay Kati, Muhammad Khan, Hakan Gökdağ, Yousef Lafi A Alshammari
Zitieren
APA
Doğanay Kati, H., He, F., Khan, M., Gökdağ, H., & Alshammari, Y. L. A. (2025). Effect of Printing Parameters on the Dynamic Characteristics of Additively Manufactured ABS Beams: An Experimental Modal Analysis and Response Surface Methodology. Polymers, 17(12), 1615. https://doi.org/10.3390/polym17121615
Vancouver
Doğanay Kati H, He F, Khan M, Gökdağ H, Alshammari YLA. Effect of Printing Parameters on the Dynamic Characteristics of Additively Manufactured ABS Beams: An Experimental Modal Analysis and Response Surface Methodology. Polymers. 2025;17(12):1615. doi:10.3390/polym17121615
BibTeX
@article{DoanayKati2025,
author = {Doğanay Kati, Hilal and He, Feiyang and Khan, Muhammad and Gökdağ, Hakan and Alshammari, Yousef Lafi A},
title = {Effect of Printing Parameters on the Dynamic Characteristics of Additively Manufactured ABS Beams: An Experimental Modal Analysis and Response Surface Methodology},
journal = {Polymers},
year = {2025},
volume = {17},
number = {12},
pages = {1615},
doi = {10.3390/polym17121615}
}
EUVIMED