EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of 3D Printing Parameters on the Electrochemical Response of Additively Manufactured Devices

Scarlat Ohanna Dávila da Trindade, Thaís Cristina de Oliveira Cândido, Matheus Martins Guedes, Arnaldo César Pereira

Analytica · 03.01.2026 · 7 (1) · 4

DOI: 10.3390/analytica7010004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Analytica, online erschienen am 03.01.2026. Verfasst von Scarlat Ohanna Dávila da Trindade und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FAPEMIG, CNPq, INCT-CEMAT/CNPq.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing, particularly fused deposition modeling (FDM), has emerged as a promising approach for producing electrochemical sensors based on conductive thermoplastic composites. In this study, the effects of various printing parameters (extrusion temperature, layer height and width, printing speed, and the number of conductive layers) on the electrochemical performance of PLA/CB electrodes fabricated via FDM were investigated. Electrochemical impedance spectroscopy analyses showed that properly adjusting these parameters promoted the formation of more efficient conductive pathways and reduced charge transfer resistance during monitoring of the redox behavior of the potassium ferrocyanide/ferricyanide probe. Furthermore, the electrochemical performance of the device was demonstrated through the detection of different model analytes, including dopamine, catechol, hydroquinone, paracetamol, and uric acid. The device was also applied to the determination of dopamine, achieving a detection limit of 0.16 µmol L−1. Overall, the results highlighted that optimizing printing conditions is essential for improving the electrochemical performance of 3D-printed devices, reinforcing the potential of 3D printing as a promising route for the fabrication of electrodes for electroanalytical applications.

Förderung

  • FAPEMIG
  • CNPq
  • INCT-CEMAT/CNPq

Zitieren

APA

Trindade, S. O. D. D., Cândido, T. C. D. O., Guedes, M. M., & Pereira, A. C. (2026). Impact of 3D Printing Parameters on the Electrochemical Response of Additively Manufactured Devices. Analytica, 7(1), 4. https://doi.org/10.3390/analytica7010004

Vancouver

Trindade SODD, Cândido TCDO, Guedes MM, Pereira AC. Impact of 3D Printing Parameters on the Electrochemical Response of Additively Manufactured Devices. Analytica. 2026;7(1):4. doi:10.3390/analytica7010004

BibTeX
@article{Trindade2026,
  author = {Trindade, Scarlat Ohanna Dávila da and Cândido, Thaís Cristina de Oliveira and Guedes, Matheus Martins and Pereira, Arnaldo César},
  title = {Impact of 3D Printing Parameters on the Electrochemical Response of Additively Manufactured Devices},
  journal = {Analytica},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {4},
  doi = {10.3390/analytica7010004}
}
Kostenlos starten →