EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Acid Hydrolysis on Morphology, Rheology, Mechanical Properties, and Processing of Thermoplastic Starch

Saffana Kouka, Veronika Gajdosova iD, Beata Strachota, Ivana Sloufova iD, Radomir Kuzel iD, Zdenek Stary, Miroslav Slouf iD

Polymers · 11.05.2025 · 17 (10) · 1310

DOI: 10.3390/polym17101310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.05.2025. Verfasst von Saffana Kouka und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Macromolecular Chemistry of the Czech Academy of Sciences, Heyrovsky Sq. 2, 16206 Prague, Czech Republic. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Agency of the Czech Republic, European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We modified native wheat starch using 15, 30, and 60 min of acid hydrolysis (AH). The non-modified and AH-modified starches were converted to highly homogeneous thermoplastic starches (TPSs) using our two-step preparation protocol consisting of solution casting and melt mixing. Our main objective was to verify if AH can decrease the processing temperature of TPS. All samples were characterized in detail by microscopic, spectroscopic, diffraction, thermomechanical, rheological, and micromechanical methods, including in situ measurements of torque and temperature during the final melt mixing step. The experimental results showed that (i) AH decreased the average molecular weight preferentially in the amorphous regions, (ii) the lower-viscosity matrix in the AH-treated starches resulted in slightly higher crystallinity, and (iii) all AH-modified TPSs with a less viscous amorphous phase and higher content of crystalline phase exhibited similar properties. The effect of the higher crystallinity predominated at a laboratory temperature and low deformations, resulting in slightly stiffer material. The effect of the lower viscosity dominated during the melt mixing, where the shorter molecules acted as a lubricant and decreased the in situ measured processing temperature. The AH-induced decrease in the processing temperature could be beneficial for energy savings and/or possible temperature-sensitive admixtures for TPS systems.

Schlagwörter

Stichwörter der Autor:innen

low viscositymelt mixingprocessing temperaturethermoplastic starch

Autor:innen und Institutionen

  • Institute of Macromolecular Chemistry of the Czech Academy of Sciences, Heyrovsky Sq. 2, 16206 Prague, Czech Republic.
  • Department of Physical and Macromolecular Chemistry, Faculty of Science, Charles University, Hlavova 2030, 12840 Prague, Czech Republic.
  • Faculty of Mathematics and Physics, Charles University, Ke Karlovu 5, 12116 Prague, Czech Republic.

ORCID-Profile: Veronika Gajdosova, Ivana Sloufova, Radomir Kuzel, Miroslav Slouf

Förderung

  • Technology Agency of the Czech Republic
  • European Union

Zitieren

APA

Kouka, S., Gajdosova, V., Strachota, B., Sloufova, I., Kuzel, R., Stary, Z., & Slouf, M. (2025). Impact of Acid Hydrolysis on Morphology, Rheology, Mechanical Properties, and Processing of Thermoplastic Starch. Polymers, 17(10), 1310. https://doi.org/10.3390/polym17101310

Vancouver

Kouka S, Gajdosova V, Strachota B, Sloufova I, Kuzel R, Stary Z, et al. Impact of Acid Hydrolysis on Morphology, Rheology, Mechanical Properties, and Processing of Thermoplastic Starch. Polymers. 2025;17(10):1310. doi:10.3390/polym17101310

BibTeX
@article{Kouka2025,
  author = {Kouka, Saffana and Gajdosova, Veronika and Strachota, Beata and Sloufova, Ivana and Kuzel, Radomir and Stary, Zdenek and Slouf, Miroslav},
  title = {Impact of Acid Hydrolysis on Morphology, Rheology, Mechanical Properties, and Processing of Thermoplastic Starch},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {10},
  pages = {1310},
  doi = {10.3390/polym17101310}
}
Kostenlos starten →