EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermoplastic Starch with Maltodextrin: Preparation, Morphology, Rheology, and Mechanical Properties

Lata Rana, Saffana Kouka, Veronika Gajdosova iD, Beata Strachota, Magdalena Konefał iD, Vaclav Pokorny iD, Ewa Pavlova, Zdenek Stary, Jaroslav Lukes iD, Marek Patocka iD, Veronika Hegrova, Ivan Fortelny und 1 weitere

Materials · 09.11.2024 · 17 (22) · 5474

DOI: 10.3390/ma17225474 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.11.2024. Verfasst von Lata Rana und 12 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Macromolecular Chemistry of the Czech Academy of Sciences, Heyrovsky Sq. 2, 162 06 Prague, Czech Republic. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Agency of the Czech Republic.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work describes the preparation of highly homogeneous thermoplastic starches (TPS’s) with the addition of 0, 5, or 10 wt.% of maltodextrin (MD) and 0 or 3 wt.% of TiO2 nanoparticles. The TPS preparation was based on a two-step preparation protocol, which consisted in solution casting (SC) followed by melt mixing (MM). Rheology measurements at the typical starch processing temperature (120 °C) demonstrated that maltodextrin acted as a lubricating agent, which decreased the viscosity of the system. Consequently, the in situ measurement during the MM confirmed that the torque moments and real processing temperatures of all TPS/MD systems decreased in comparison with the pure TPS. The detailed characterization of morphology, thermomechanical properties, and local mechanical properties revealed that the viscosity decrease was accompanied by a slight decrease in the system homogeneity. The changes in the real processing temperatures might be quite moderate (ca 2–3 °C), but maltodextrin is a cheap and easy-to-add modifier, and the milder processing conditions are advantageous for both technical applications (energy savings) and biomedical applications (beneficial for temperature-sensitive additives, such as antibiotics).

Schlagwörter

Stichwörter der Autor:innen

lower processing temperaturelower viscositymaltodextrin modificationthermoplastic starch

Autor:innen und Institutionen

  • Institute of Macromolecular Chemistry of the Czech Academy of Sciences, Heyrovsky Sq. 2, 162 06 Prague, Czech Republic.
  • Faculty of Mechanical Engineering, Czech Technical University in Prague, Technicka 4, 166 00 Prague, Czech Republic.
  • NenoVision, Purkynova 127, 612 00 Brno, Czech Republic.

ORCID-Profile: Veronika Gajdosova, Magdalena Konefał, Vaclav Pokorny, Jaroslav Lukes, Marek Patocka, Miroslav Slouf

Förderung

  • Technology Agency of the Czech Republic

Zitieren

APA

Rana, L., Kouka, S., Gajdosova, V., Strachota, B., Konefał, M., Pokorny, V., Pavlova, E., Stary, Z., Lukes, J., Patocka, M., Hegrova, V., Fortelny, I., & Slouf, M. (2024). Thermoplastic Starch with Maltodextrin: Preparation, Morphology, Rheology, and Mechanical Properties. Materials, 17(22), 5474. https://doi.org/10.3390/ma17225474

Vancouver

Rana L, Kouka S, Gajdosova V, Strachota B, Konefał M, Pokorny V, et al. Thermoplastic Starch with Maltodextrin: Preparation, Morphology, Rheology, and Mechanical Properties. Materials. 2024;17(22):5474. doi:10.3390/ma17225474

BibTeX
@article{Rana2024,
  author = {Rana, Lata and Kouka, Saffana and Gajdosova, Veronika and Strachota, Beata and Konefał, Magdalena and Pokorny, Vaclav and Pavlova, Ewa and Stary, Zdenek and Lukes, Jaroslav and Patocka, Marek and Hegrova, Veronika and Fortelny, Ivan and Slouf, Miroslav},
  title = {Thermoplastic Starch with Maltodextrin: Preparation, Morphology, Rheology, and Mechanical Properties},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {22},
  pages = {5474},
  doi = {10.3390/ma17225474}
}
Kostenlos starten →