EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Qualification of the Vitrimeric Matrices in Industrial-Scale Wet Filament Winding Processes for Type-4 Pressure Vessels

Jonathan Alms iD, Anna Katharina Sambale iD, Jannick Fuchs iD, Niklas Lorenz iD, Nina von den Berg iD, Tobias Conen iD, Hakan Çelik iD, Rainer Dahlmann, Christian Hopmann, Markus Stommel iD

Polymers · 23.04.2025 · 17 (9) · 1146

DOI: 10.3390/polym17091146 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.04.2025. Verfasst von Jonathan Alms und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Plastics Processing in Industry and Craft, RWTH Aachen University, 52074 Aachen, Germany. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft (DFG), RWTH University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The production of fibre-reinforced composites for use in applications such as type-4 pressure vessels for hydrogen storage is achieved through the use of a thermoset matrix. However, the recycling of thermosets presents a significant challenge due to the lack of established recycling methods. Epoxy-based vitrimers show thermoset characteristics during the manufacturing and utilisation phases but exhibit thermoplastic behaviour at elevated temperatures of 190 °C. This study investigates the industrial-scale production of carbon fibre reinforced vitrimers via a wet filament winding, as exemplified by a type-4 pressure vessel demonstrator. Processing conditions of industrial processes have yet to be applied to vitrimers; therefore, two vitrimer formulations are compared to a conventional epoxy thermoset. The processability and resulting composite quality of wound composites using these materials as matrices are compared. The mechanical properties of the composites are compared using an interlaminar shear strength test, demonstrating that the vitrimeric matrices exhibit 19.8% (23 °C) and 49.2% (140 °C) improved interlaminar strength. Consequently, the epoxy-based vitrimers investigated in this study can be employed as a direct replacement for the thermoset matrix in industrial-scale applications, with the potential for recycling the composite. To increase composite qualities, the winding process must be adapted for vitrimers, since a pore free composite could not be achieved.

Schlagwörter

Stichwörter der Autor:innen

4-aminophenyl disulfidecarbon fibre compositescarbon fibre reinforced polymersthermo-mechanical propertiesvitrimeric resinvitrimers

Autor:innen und Institutionen

  • Institute for Plastics Processing in Industry and Craft, RWTH Aachen University, 52074 Aachen, Germany.
  • Institute of Polymer Materials, Leibniz-Institute for Polymer Research Dresden e.V., 01069 Dresden, Germany.
  • Institute for Materials Science, TUD Dresden University of Technology, 01062 Dresden, Germany.

ORCID-Profile: Jonathan Alms, Anna Katharina Sambale, Jannick Fuchs, Niklas Lorenz, Nina von den Berg, Tobias Conen, Hakan Çelik, Markus Stommel

Förderung

  • Deutsche Forschungsgemeinschaft (DFG)
  • RWTH University

Zitieren

APA

Alms, J., Sambale, A. K., Fuchs, J., Lorenz, N., von den Berg, N., Conen, T., Çelik, H., Dahlmann, R., Hopmann, C., & Stommel, M. (2025). Qualification of the Vitrimeric Matrices in Industrial-Scale Wet Filament Winding Processes for Type-4 Pressure Vessels. Polymers, 17(9), 1146. https://doi.org/10.3390/polym17091146

Vancouver

Alms J, Sambale AK, Fuchs J, Lorenz N, von den Berg N, Conen T, et al. Qualification of the Vitrimeric Matrices in Industrial-Scale Wet Filament Winding Processes for Type-4 Pressure Vessels. Polymers. 2025;17(9):1146. doi:10.3390/polym17091146

BibTeX
@article{Alms2025,
  author = {Alms, Jonathan and Sambale, Anna Katharina and Fuchs, Jannick and Lorenz, Niklas and von den Berg, Nina and Conen, Tobias and Çelik, Hakan and Dahlmann, Rainer and Hopmann, Christian and Stommel, Markus},
  title = {Qualification of the Vitrimeric Matrices in Industrial-Scale Wet Filament Winding Processes for Type-4 Pressure Vessels},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {9},
  pages = {1146},
  doi = {10.3390/polym17091146}
}
Kostenlos starten →