Characterization and modeling of an epoxy vitrimer based on disulfide exchange for wet filament winding applications
Polymer Engineering & Science · 2024-08 · 64 (8) · 3682-3702
DOI: 10.1002/pen.26805 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 12.06.2024. Verfasst von N. Lorenz und 5 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 129 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Bundesministerium für Wirtschaft und Klimaschutz.
Abstract (Originalsprache)
The present paper investigates the suitability of a vitrimeric epoxy resin for processing in the wet filament winding (WFW) process to manufacture fiber‐reinforced polymers (FRP). Comprehensive material characterization of a commercially available epoxy and vitrimeric resin based on disulfide exchange is carried out, and the processing in WFW is evaluated by analyzing thermomechanical, rheological, thermochemical properties, and chemical shrinkage. The direct comparison of a vitrimer and an established epoxy resin permits an indication of the processability and necessary adjustments in WFW. Based on the implications of modeling, we demonstrate the processing of the vitrimeric resin in the WFW process by increasing the resin bath temperatures. The vitrimer's and conventional resin's elastic modulus development and compression behavior were similar, highlighting the vitrimeric resin's potential. Further, the results confirm that established characterization and modeling routines can be transferred to vitrimeric resins and, therefore, path the way toward advanced process simulation of vitrimeric resin's processing. For this, the present publication gives essential advice for setting up testing schedules for characterizing epoxy vitrimers' processing behavior and their appropriate modeling. The present work underlines the potential of applying commercially available dynamic hardeners to manufacture recyclable and malleable FRP in established processes. Highlights Material characterization and modeling of wet filament winding process. Wet filament winding of epoxy vitrimers. Thermomechanical and chemical shrinkage characterization of epoxy vitrimers. Rheological and kinetic modeling of epoxy vitrimer.
Förderung
- Bundesministerium für Wirtschaft und Klimaschutz
Zitieren
APA
Lorenz, N., Zawadzki, T., Keller, L., Fuchs, J., Fischer, K., & Hopmann, C. (2024). Characterization and modeling of an epoxy vitrimer based on disulfide exchange for wet filament winding applications. Polymer Engineering & Science, 64(8), 3682-3702. https://doi.org/10.1002/pen.26805
Vancouver
Lorenz N, Zawadzki T, Keller L, Fuchs J, Fischer K, Hopmann C. Characterization and modeling of an epoxy vitrimer based on disulfide exchange for wet filament winding applications. Polymer Engineering & Science. 2024;64(8):3682-3702. doi:10.1002/pen.26805
BibTeX
@article{Lorenz2024,
author = {Lorenz, N. and Zawadzki, T. and Keller, L. and Fuchs, J. and Fischer, K. and Hopmann, Ch.},
title = {Characterization and modeling of an epoxy vitrimer based on disulfide exchange for wet filament winding applications},
journal = {Polymer Engineering & Science},
year = {2024},
volume = {64},
number = {8},
pages = {3682--3702},
doi = {10.1002/pen.26805}
}
EUVIMED