EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Light-Mediated 3D-Printed Wound Dressings Based on Natural Polymers with Improved Adhesion and Antioxidant Properties

Rute Silva, Matilde Medeiros, Carlos T B Paula iD, Sofia Saraiva iD, Rafael C Rebelo iD, Patrícia Pereira iD, Jorge F J Coelho, Arménio C Serra, Ana C Fonseca

Polymers · 20.04.2025 · 17 (8) · 1114

DOI: 10.3390/polym17081114 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.04.2025. Verfasst von Rute Silva und 8 weiteren Autor:innen. Beteiligte Einrichtung: CEMMPRE, ARISE, Department of Chemical Engineering, University of Coimbra, Rua Sílvio Lima-Polo II, 3030-790 Coimbra, Portugal. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FEDER-European Regional Development Fund, Fundação para a Ciência e Tecnologia (FCT), FEDER—European Regional Development Fund through the COMPETE Programme (Operational Programme for Competitiveness).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The lack of personalized wound dressings tailored to individual needs can significantly hinder wound healing. Hydrogels offer a promising solution, as they can be engineered to mimic the extracellular matrix (ECM), providing an optimal environment for wound repair. The integration of digital light processing (DLP), a high-resolution 3D printing process, allows precise customization of hydrogel-based wound dressings. In this study, gelatin methacrylate (GelMA)-based formulations were prepared in combination with three different polymeric precursors: methacrylated hyaluronic acid (HAMA), poly (ethylene glycol) diacrylate (PEGDA) and allyl cellulose (MCCA). These precursors were used to print high-resolution micropatterned patches. The printed constructs revealed a high gel content and a good resistance to hydrolytic degradation. To improve the adhesive and antioxidant properties of the printed patches, gallic acid (GA) was incorporated through surface functionalization. This enabled the scavenging of approximately 80% of free radicals within just 4 h. The adhesive properties of the printed wound dressings were also significantly improved, with further enhancement observed upon the addition of Fe3+ ions. In vitro cytocompatibility tests using a fibroblast (NHDF) cell line confirmed the suitability of the materials for biomedical applications. Thus, this study demonstrates the potential of DLP-printed hydrogels as advanced personalized wound dressing materials.

Schlagwörter

Stichwörter der Autor:innen

3D printingadhesion propertiesantioxidant propertiesdigital light processing (DLP)hydrogelmicropatterned structureswound healing

Autor:innen und Institutionen

  • CEMMPRE, ARISE, Department of Chemical Engineering, University of Coimbra, Rua Sílvio Lima-Polo II, 3030-790 Coimbra, Portugal.
  • IPN, Instituto Pedro Nunes, Associação para a Inovação e Desenvolvimento em Ciência e Tecnologia, Rua Pedro Nunes, 3030-199 Coimbra, Portugal.

ORCID-Profile: Carlos T B Paula, Sofia Saraiva, Rafael C Rebelo, Patrícia Pereira

Förderung

  • FEDER-European Regional Development Fund
  • Fundação para a Ciência e Tecnologia (FCT)
  • FEDER—European Regional Development Fund through the COMPETE Programme (Operational Programme for Competitiveness)
  • National Funds through FCT
  • Rede Nacional de Ressonância Magnética Nuclear (RNRMN)
  • FEDER funds through the program COMPETE—Programa Operacional Factores de Competitividade—and through national funds through FCT
  • FCT

Zitieren

APA

Silva, R., Medeiros, M., Paula, C. T. B., Saraiva, S., Rebelo, R. C., Pereira, P., Coelho, J. F. J., Serra, A. C., & Fonseca, A. C. (2025). Light-Mediated 3D-Printed Wound Dressings Based on Natural Polymers with Improved Adhesion and Antioxidant Properties. Polymers, 17(8), 1114. https://doi.org/10.3390/polym17081114

Vancouver

Silva R, Medeiros M, Paula CTB, Saraiva S, Rebelo RC, Pereira P, et al. Light-Mediated 3D-Printed Wound Dressings Based on Natural Polymers with Improved Adhesion and Antioxidant Properties. Polymers. 2025;17(8):1114. doi:10.3390/polym17081114

BibTeX
@article{Silva2025,
  author = {Silva, Rute and Medeiros, Matilde and Paula, Carlos T B and Saraiva, Sofia and Rebelo, Rafael C and Pereira, Patrícia and Coelho, Jorge F J and Serra, Arménio C and Fonseca, Ana C},
  title = {Light-Mediated 3D-Printed Wound Dressings Based on Natural Polymers with Improved Adhesion and Antioxidant Properties},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {8},
  pages = {1114},
  doi = {10.3390/polym17081114}
}
Kostenlos starten →