Optimization and Characterization of Acetic Acid-Hydrolyzed Cassava Starch Nanoparticles for Enhanced Oil Recovery Applications
Polymers · 16.04.2025 · 17 (8) · 1071
DOI: 10.3390/polym17081071 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 16.04.2025. Verfasst von Mohammed E Ali Mohsin und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, College of Engineering, King Faisal University, Al Ahsa 31982, Saudi Arabia. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia.
Abstract (Originalsprache)
This study presents an optimized and sustainable route for synthesizing cassava starch nanoparticles (CSNPs) tailored for enhanced oil recovery (EOR) applications. Conventional inorganic acid hydrolysis methods often produce low nanoparticle yields and large particle sizes due to extensive degradation of both amorphous and crystalline starch regions. To overcome these challenges, ultrasonic-assisted acetic acid hydrolysis coupled with response surface methodology (RSM) was applied. Under optimal conditions, two distinct CSNPs were produced: CSNP A (206.77 nm, 96.23% yield in 3 days) and CSNP B (99.4 nm, 96.07% yield in 7 days). Characterization via Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) confirmed enhanced crystallinity, while rheological analyses revealed shear-thickening behavior and improved viscosity, key factors for effective polymer flooding in EOR. DSC and TGA measurements highlighted robust thermal stability, essential for high-temperature reservoir conditions. A preliminary assessment suggests CSNP B’s small size (99.4 nm), high viscosity, and thermal stability make it particularly promising for EOR in low-permeability reservoirs, with future core flooding studies needed for validation. These attributes position CSNPs as sustainable alternatives for polymer flooding in challenging reservoir environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, College of Engineering, King Faisal University, Al Ahsa 31982, Saudi Arabia.
- UTM-MPRC Institute for Oil and Gas, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
- Centre of Lipids Engineering & Applied Research, Ibnu-Sina Institute for Scientific & Industrial Research, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
- Department of Mechanical Engineering, College of Engineering, King Faisal University, Al-Ahsa 31982, Saudi Arabia.
ORCID-Profile: Mohammed E Ali Mohsin, Agus Arsad, Suleiman Mousa, Muhammad Abbas Ahmad Zaini, Mohammad Yousef Younes, Mohammad Faseeulla Khan
Förderung
- Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia
Zitieren
APA
Mohsin, M. E. A., Rahman, A. F. A., Harun, Z., Arsad, A., Mousa, S., Ahmad Zaini, M. A., Younes, M. Y., & Khan, M. F. (2025). Optimization and Characterization of Acetic Acid-Hydrolyzed Cassava Starch Nanoparticles for Enhanced Oil Recovery Applications. Polymers, 17(8), 1071. https://doi.org/10.3390/polym17081071
Vancouver
Mohsin MEA, Rahman AFA, Harun Z, Arsad A, Mousa S, Ahmad Zaini MA, et al. Optimization and Characterization of Acetic Acid-Hydrolyzed Cassava Starch Nanoparticles for Enhanced Oil Recovery Applications. Polymers. 2025;17(8):1071. doi:10.3390/polym17081071
BibTeX
@article{Mohsin2025,
author = {Mohsin, Mohammed E Ali and Rahman, A F A and Harun, Zakiah and Arsad, Agus and Mousa, Suleiman and Ahmad Zaini, Muhammad Abbas and Younes, Mohammad Yousef and Khan, Mohammad Faseeulla},
title = {Optimization and Characterization of Acetic Acid-Hydrolyzed Cassava Starch Nanoparticles for Enhanced Oil Recovery Applications},
journal = {Polymers},
year = {2025},
volume = {17},
number = {8},
pages = {1071},
doi = {10.3390/polym17081071}
}
EUVIMED