Enhancing Oil Recovery by Polymeric Flooding with Purple Yam and Cassava Nanoparticles
Molecules · 07.06.2023 · 28 (12) · 4614
DOI: 10.3390/molecules28124614 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 07.06.2023. Verfasst von Hasanain A Al-Jaber und 8 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Oil and Gas, Faculty of Engineering, Universiti Teknologi Malaysia (UTM), Skudai 81310, Johor, Malaysia. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: School of Chemical and Energy Engineering, Universiti Teknologi Malaysia (UTM).
Abstract (Originalsprache)
Significant amounts of oil remain in the reservoir after primary and secondary operations, and to recover the remaining oil, enhanced oil recovery (EOR) can be applied as one of the feasible options remaining nowadays. In this study, new nano-polymeric materials have been prepared from purple yam and cassava starches. The yield of purple yam nanoparticles (PYNPs) was 85%, and that of cassava nanoparticles (CSNPs) was 90.53%. Synthesized materials were characterized through particle size distribution (PSA), Zeta potential distribution, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The performance of PYNPs in recovering oil was better than CSNPs, as found from the recovery experiments. Zeta potential distribution results confirmed the stability of PYNPs over CSNPs (−36.3 mV for PYNPs and −10.7 mV for CSNPs). The optimum concentration for these nanoparticles has been found from interfacial tension measurements and rheological properties, and it was 0.60 wt.% for PYNPs and 0.80 wt.% for CSNPs. A more incremental recovery (33.46%) was achieved for the polymer that contained PYNPs in comparison to the other nano-polymer (31.3%). This paves the way for a new technology for polymer flooding that may replace the conventional method, which depends on partially hydrolyzed polyacrylamide (HPAM).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Oil and Gas, Faculty of Engineering, Universiti Teknologi Malaysia (UTM), Skudai 81310, Johor, Malaysia.
- Department of Chemical Industries Technologies, Southern Technical University, Basrah 61006, Iraq.
- UTM-MPRC Institute for Oil and Gas, Faculty of Engineering, Universiti Teknologi Malaysia (UTM), Skudai 81310, Johor, Malaysia.
- Chemical and Petroleum Engineering Department, United Arab Emirates University (UAEU), Al Ain P.O. Box 15551, United Arab Emirates.
- Chemical Engineering Department, College of Engineering, University of Al-Qadisiyah, Al-Diwaniyah City P.O. Box 88, Iraq.
- Department of Chemical Engineering, Norwegian University of Science and Technology, Høgskoleringen 1, 7491 Trondheim, Norway.
ORCID-Profile: Hasanain A Al-Jaber, Agus Arsad, Muhammad Tahir, Sulalit Bandyopadhyay, Abdulmunem R Abdulmunem, Anis Farhana Abdul Rahman
Förderung
- School of Chemical and Energy Engineering, Universiti Teknologi Malaysia (UTM)
Zitieren
APA
Al-Jaber, H. A., Arsad, A., Tahir, M., Nuhma, M. J., Bandyopadhyay, S., Abdulmunem, A. R., Abdul Rahman, A. F., Harun, Z. B., & Agi, A. (2023). Enhancing Oil Recovery by Polymeric Flooding with Purple Yam and Cassava Nanoparticles. Molecules, 28(12), 4614. https://doi.org/10.3390/molecules28124614
Vancouver
Al-Jaber HA, Arsad A, Tahir M, Nuhma MJ, Bandyopadhyay S, Abdulmunem AR, et al. Enhancing Oil Recovery by Polymeric Flooding with Purple Yam and Cassava Nanoparticles. Molecules. 2023;28(12):4614. doi:10.3390/molecules28124614
BibTeX
@article{AlJaber2023,
author = {Al-Jaber, Hasanain A and Arsad, Agus and Tahir, Muhammad and Nuhma, Mustafa Jawad and Bandyopadhyay, Sulalit and Abdulmunem, Abdulmunem R and Abdul Rahman, Anis Farhana and Harun, Zakiah Binti and Agi, Augustine},
title = {Enhancing Oil Recovery by Polymeric Flooding with Purple Yam and Cassava Nanoparticles},
journal = {Molecules},
year = {2023},
volume = {28},
number = {12},
pages = {4614},
doi = {10.3390/molecules28124614}
}
EUVIMED