The Impact of Mechanical Recycling on Ligno-Cellulose Fibre Containing PLA Biocomposite
Polymers · 11.03.2025 · 17 (6) · 732
DOI: 10.3390/polym17060732 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.03.2025. Verfasst von Faizan Asad und 4 weiteren Autor:innen. Beteiligte Einrichtung: VTT Technical Research Centre of Finland, Visiokatu 4, 33101 Tampere, Finland. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Academy of Finland, Business Finland.
Abstract (Originalsprache)
Biocomposites, made from biobased polymers with natural fibre reinforcement, offer a feasible path towards environment friendly and sustainable materials. However, biocomposites have struggled to attract ta market that is mostly dominated by conventional fossil-based polymers. To increase the cost efficiency and extend the lifespan of biocomposites, the effects of mechanical recycling on their properties should be thoroughly explored. While there has been some research on recycling natural fibre-reinforced biocomposites, limited attention has been paid to biocomposites reinforced with softwood fibre. This study investigates the impact of mechanical recycling on poly-lactic acid (PLA) biocomposites reinforced with bleached and unbleached softwood kraft pulp fibres at 15 wt% and 30 wt%. The results show that single-stage mechanical recycling improves Young’s modulus by 11–13% while maintaining impact strength. Tensile strength remains stable for biocomposites with 15 wt% fibre but decreases by 6–8% for with 30 wt% biocomposites. Recycling improves fibre dispersion by reducing agglomeration but leads to PLA degradation, which could potentially be mitigated by adding virgin polymer or chain extenders. These findings highlight the potential for reusing PLA-softwood fibre biocomposites while emphasizing the need for further research into multiple recycling cycles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- VTT Technical Research Centre of Finland, Visiokatu 4, 33101 Tampere, Finland.
- VTT Technical Research Centre of Finland, Koivurannantie 1, 40400 Jyväskylä, Finland.
- VTT Technical Research Centre of Finland, Tekniikantie 21, 02150 Espoo, Finland.
- Materials Science and Environmental Engineering, Tampere University, Korkeakoulunkatu 7,33014 Tampere, Finland.
ORCID-Profile: Faizan Asad, Kirsi Immonen, Titta Kiiskinen, Atte Mikkelson, Essi Sarlin
Förderung
- Academy of Finland
- Business Finland
Zitieren
APA
Asad, F., Immonen, K., Kiiskinen, T., Mikkelson, A., & Sarlin, E. (2025). The Impact of Mechanical Recycling on Ligno-Cellulose Fibre Containing PLA Biocomposite. Polymers, 17(6), 732. https://doi.org/10.3390/polym17060732
Vancouver
Asad F, Immonen K, Kiiskinen T, Mikkelson A, Sarlin E. The Impact of Mechanical Recycling on Ligno-Cellulose Fibre Containing PLA Biocomposite. Polymers. 2025;17(6):732. doi:10.3390/polym17060732
BibTeX
@article{Asad2025,
author = {Asad, Faizan and Immonen, Kirsi and Kiiskinen, Titta and Mikkelson, Atte and Sarlin, Essi},
title = {The Impact of Mechanical Recycling on Ligno-Cellulose Fibre Containing PLA Biocomposite},
journal = {Polymers},
year = {2025},
volume = {17},
number = {6},
pages = {732},
doi = {10.3390/polym17060732}
}
EUVIMED