Effects of Process Parameters on the Mechanical Properties and Microstructure of Additively Manufactured Carbon Black Particles-Reinforced Thermoplastic Polyurethane Composite Samples
Polymers · 06.02.2025 · 17 (3) · 426
DOI: 10.3390/polym17030426 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 06.02.2025. Verfasst von Fatima Hira und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Shaheed Benazir Bhutto Women University, Peshawar 25000, Pakistan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University.
Abstract (Originalsprache)
Additive manufacturing (AM) techniques make fabricating complex designs, prototypes, and end-user products possible. Conductive polymer composites find applications in flexible electronics, sensor fabrication, and electrical circuits. In this study, thermoplastic polyurethane (TPU)-based conductive polymer composite samples were fabricated via fused filament fabrication (FFF). The effects of three important process parameters, including infill density (ID), layer thickness (LT), and fan speed (FS), on various mechanical properties (tensile and compressive properties) were investigated. It was observed that all the considered process parameters affect the mechanical properties, and they are significant parameters, as per the analysis of variance (ANOVA). From scanning electron microscopy (SEM) and optical microscopy, various combinations of parameters such as low ID, high LT, and high FS resulted in the formation of defects such as voids, cracks, and warping, which resulted in low mechanical properties. Finally, process parameter optimization was performed, resulting in a conductive polymer composite with the best possible combination of mechanical properties at high ID, low LT, and medium FS.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics, Shaheed Benazir Bhutto Women University, Peshawar 25000, Pakistan.
- Department of Mathematics, University of Peshawar, Peshawar 25120, Pakistan.
- Department of Computer Science, Sarhad University of Science & Information Technology (SUIT), Peshawar 25000, Pakistan.
- Department of Mechanical Engineering, University of Engineering and Technology Peshawar, Peshawar 25120, Pakistan.
- Mechanical Engineering Department, College of Engineering, University of Bahrain, Isa Town 32038, Bahrain.
- Department of Data Science, Friedrich-Alexander Universität Erlangen-Nürnberg, 91054 Erlangen, Germany.
ORCID-Profile: Imran Khan, Mohammed Alkahtani
Förderung
- King Saud University
Zitieren
APA
Hira, F., Asif, M., Ullah, H., Khan, I., Hussain, G., Amir, M., & Alkahtani, M. (2025). Effects of Process Parameters on the Mechanical Properties and Microstructure of Additively Manufactured Carbon Black Particles-Reinforced Thermoplastic Polyurethane Composite Samples. Polymers, 17(3), 426. https://doi.org/10.3390/polym17030426
Vancouver
Hira F, Asif M, Ullah H, Khan I, Hussain G, Amir M, et al. Effects of Process Parameters on the Mechanical Properties and Microstructure of Additively Manufactured Carbon Black Particles-Reinforced Thermoplastic Polyurethane Composite Samples. Polymers. 2025;17(3):426. doi:10.3390/polym17030426
BibTeX
@article{Hira2025,
author = {Hira, Fatima and Asif, Muhammad and Ullah, Hammad and Khan, Imran and Hussain, Ghulam and Amir, Muhammad and Alkahtani, Mohammed},
title = {Effects of Process Parameters on the Mechanical Properties and Microstructure of Additively Manufactured Carbon Black Particles-Reinforced Thermoplastic Polyurethane Composite Samples},
journal = {Polymers},
year = {2025},
volume = {17},
number = {3},
pages = {426},
doi = {10.3390/polym17030426}
}
EUVIMED