EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Efficiency and Low-Resistance Melt-Blown/Electrospun PLA Composites for Air Filtration

Yongmei Guo, Mingzhu Wu, Xiaojian Ye, Shengchao Wei, Luming Huang, Hailing Guo iD

Polymers · 06.02.2025 · 17 (3) · 424

DOI: 10.3390/polym17030424 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.02.2025. Verfasst von Yongmei Guo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Fujian Key Laboratory of Novel Functional Textile Fibers and Materials, Clothing and Design Faculty, Minjiang University, Fuzhou 350108, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fuzhou City's Major Science and Technology Project, Regional Development Project of Fujian Provincial Science and Technology Department, Foreign Cooperation Project of Fujian Provincial Science and Technology Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable polylactic acid (PLA) was used to fabricate nonwoven fabrics via the melt blowing process, followed by electrospinning to deposit a nanofiber membrane. This composite process yielded PLA melt-blown/electrospun composite materials with excellent filtration performance. The effects of the solution concentration and spinning duration on the composite structure and material performance were investigated. The optimal composite was produced using a 10 wt.% PLA spinning solution prepared with a solvent mixture of dichloromethane (DCM) and N, N-dimethylformamide (DMF) in a 75/25 weight ratio. The process parameters included a spinning duration of 5 h, 18 kV voltage, 1.5 mL/h flow rate, and 12 cm collection distance. The resulting composite achieved a filtration efficiency of 98.7%, a pressure drop of 142 Pa, an average pore size of 5 μm, and a contact angle of 138.7°. These results provided optimal process parameters for preparing PLA melt-blown/electrospun composite filtration materials. This study highlights the potential of hydrophobic PLA composites with high filtration efficiency and low air resistance as environmentally friendly alternatives to traditional non-degradable filtration materials.

Schlagwörter

Stichwörter der Autor:innen

electrospinningfiltration performancemelt blowingpolylactic acid

Autor:innen und Institutionen

  • Fujian Key Laboratory of Novel Functional Textile Fibers and Materials, Clothing and Design Faculty, Minjiang University, Fuzhou 350108, China.
  • State Key Laboratory of Heavy Oil Processing, College of Chemical Engineering, China University of Petroleum (East China), Qingdao 266580, China.
  • Fuzhou Chunhui Clothing Limited Company, Fuzhou 350108, China.

ORCID-Profile: Hailing Guo

Förderung

  • Fuzhou City's Major Science and Technology Project
  • Regional Development Project of Fujian Provincial Science and Technology Department
  • Foreign Cooperation Project of Fujian Provincial Science and Technology Department
  • National Key Research and Development Program of China of Ministry of Science and Technology
  • Fuzhou City’s Major Science and Technology Project
  • Regional Development Project of the Fujian Provincial Science and Technology Department
  • Foreign Cooperation Project of the Fujian Provincial Science and Technology Department
  • National Key Research and Development Program of China from the Ministry of Science and Technology

Zitieren

APA

Guo, Y., Wu, M., Ye, X., Wei, S., Huang, L., & Guo, H. (2025). High-Efficiency and Low-Resistance Melt-Blown/Electrospun PLA Composites for Air Filtration. Polymers, 17(3), 424. https://doi.org/10.3390/polym17030424

Vancouver

Guo Y, Wu M, Ye X, Wei S, Huang L, Guo H. High-Efficiency and Low-Resistance Melt-Blown/Electrospun PLA Composites for Air Filtration. Polymers. 2025;17(3):424. doi:10.3390/polym17030424

BibTeX
@article{Guo2025,
  author = {Guo, Yongmei and Wu, Mingzhu and Ye, Xiaojian and Wei, Shengchao and Huang, Luming and Guo, Hailing},
  title = {High-Efficiency and Low-Resistance Melt-Blown/Electrospun PLA Composites for Air Filtration},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {3},
  pages = {424},
  doi = {10.3390/polym17030424}
}
Kostenlos starten →