Preparation of Self-Curling Melt-Blown Fibers with Crimped Masterbatch (CM) and Its Application for Low-Pressure Air Filtration
Polymers · 10.08.2023 · 15 (16) · 3365
DOI: 10.3390/polym15163365 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.08.2023. Verfasst von Xiaofang Lin und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Textile and Clothing Engineering, Soochow University, Suzhou 215123, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fujian Province Nonwoven New Materials Innovation Laboratory Platform Project.
Abstract (Originalsprache)
Particulate matter (PM) and airborne viruses pose significant threats to both the environment and public health. As the most viable solution to prevent the inhalation of these pollutants, there is an urgent demand for face masks with excellent filtration efficiency and low-pressure drop. In this study, a crimped masterbatch (CM) is added to polypropylene feedstocks to produce curling fibers through melt-blown spinning. These curled fibers exhibit low filtration resistance and effective dust-holding performances when used for air filtration. The effect of adding CM on fiber diameter, pore size, crimp, porosity, roughness, and surface potential was studied. The filtration performance of the materials, including the PM filtration capabilities, recirculation filtration, and loading test performance, were also investigated. The results demonstrate that the degree of fiber crimp can be adjusted by incorporating varying amounts of CM. This curling was caused by the uneven shrinkage that occurred due to variations in thermal contraction between these polymers. The curled fibers created a fluffy structure in the fiber network and modified the distribution of pore sizes within it. Under the same filtration conditions as sodium chloride aerogel, CM–2 (PP:CM 8:2) exhibited similar filtration efficiency (95.54% vs. 94.74%), lower filtration resistance (88.68 Pa vs. 108.88 Pa), higher quality factor (0.035 Pa−1 vs. 0.028 Pa−1) and better dust holding capacity (10.39 g/m2 vs. 9.20 g/m2) compared to CM–0 (PP:CM 10:0). After 30 days of indoor storage, the filtration efficiency of CM–2 remained above 94%. The self-curling melt-blown filtration material developed here could potentially be applied in the field of protective masks.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Textile and Clothing Engineering, Soochow University, Suzhou 215123, China.
- Institute of Smart & Ecological Textile, Quanzhou Normal University, Quanzhou 362002, China.
- Key Laboratory of Clothing Materials of Universities in Fujian, Quanzhou Normal University, Quanzhou 362002, China.
- College of Textile and Apparel, Quanzhou Normal University, Quanzhou 362002, China.
ORCID-Profile: Huan Qi
Förderung
- Fujian Province Nonwoven New Materials Innovation Laboratory Platform Project
Zitieren
APA
Lin, X., Lin, M., Li, T., Lu, H., Qi, H., Chen, T., Wu, L., & Zhang, C. (2023). Preparation of Self-Curling Melt-Blown Fibers with Crimped Masterbatch (CM) and Its Application for Low-Pressure Air Filtration. Polymers, 15(16), 3365. https://doi.org/10.3390/polym15163365
Vancouver
Lin X, Lin M, Li T, Lu H, Qi H, Chen T, et al. Preparation of Self-Curling Melt-Blown Fibers with Crimped Masterbatch (CM) and Its Application for Low-Pressure Air Filtration. Polymers. 2023;15(16):3365. doi:10.3390/polym15163365
BibTeX
@article{Lin2023,
author = {Lin, Xiaofang and Lin, Minggang and Li, Tan and Lu, Hao and Qi, Huan and Chen, Ting and Wu, Lili and Zhang, Chuyang},
title = {Preparation of Self-Curling Melt-Blown Fibers with Crimped Masterbatch (CM) and Its Application for Low-Pressure Air Filtration},
journal = {Polymers},
year = {2023},
volume = {15},
number = {16},
pages = {3365},
doi = {10.3390/polym15163365}
}
EUVIMED