EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Porous Polycaprolactone with Chitosan-Graft-PCL Modified Surface for In Situ Tissue Engineering

Johannes Pitts iD, Robert Hänsch, Yvonne Roger iD, Andrea Hoffmann iD, Henning Menzel iD

Polymers · 30.01.2025 · 17 (3) · 383

DOI: 10.3390/polym17030383 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.01.2025. Verfasst von Johannes Pitts und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Technical Chemistry, Braunschweig University of Technology, 38106 Braunschweig, Germany. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, German Research Foundation (DFG).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tissue engineering has emerged as a promising approach for improved regeneration of native tissue and could increase the quality of life of many patients. However, the treatment of injured tissue transitions is still in its early stages, relying primarily on a purely physical approach in medical surgery. A biodegradable implant with a modified surface that is capable of biological active protein delivery via a nanoparticulate release system could advance the field of musculoskeletal disorder treatments enormously. In this study, interconnected 3D macroporous scaffolds based on Polycaprolactone (PCL) were fabricated in a successive process of blending, annealing and leaching. Blending with varying parts of Polyethylene oxide (PEO), NaCl and (powdered) sucrose and altering processing conditions yielded scaffolds with a huge variety of morphologies. The resulting unmodified hydrophobic scaffolds were modified using two graft polymers (CS-g-PCLx) with x = 29 and 56 (x = PCL units per chitosan unit). Due to the chitosan backbone hydrophilicity was increased and a platform for a versatile nanoparticulate release system was introduced. The graft polymers were synthesized via ring opening polymerization (ROP) of ε-Caprolactone using hydroxy groups of the chitosan backbone as initiators (grafting from). The suspected impact on biocompatibility of the modification was investigated by in vitro cell testing. In addition, the CS-g-PCL modification opened up the possibility of Layer by Layer (LbL) coating with alginate (ALG) and TGF-β3-loaded chitosan tripolyphosphate (CS-TGF-β3-TPP) nanoparticles. The subsequent release study showed promising amounts of growth factor released regarding successful in vitro cell differentiation and therefore could have a possible therapeutic impact.

Schlagwörter

Stichwörter der Autor:innen

PCLPEOTGF releasechitosan-graft-PCLin situ tissue engineeringin vitro cell testingmacroporous scaffoldpolymer blendingporositysucrosesurface modificationsurface potential

Autor:innen und Institutionen

  • Institute for Technical Chemistry, Braunschweig University of Technology, 38106 Braunschweig, Germany.
  • Institute of Plant Biology, Braunschweig University of Technology, 38106 Braunschweig, Germany.
  • Hannover Medical School, Department of Orthopaedic Surgery, Biological Basics for Biohybrid Implants, 30625 Hannover, Germany.
  • Niedersächsisches Zentrum für Biomedizintechnik, Implantatforschung und Entwicklung (NIFE), 30625 Hannover, Germany.

ORCID-Profile: Johannes Pitts, Yvonne Roger, Andrea Hoffmann, Henning Menzel

Förderung

  • Deutsche Forschungsgemeinschaft
  • German Research Foundation (DFG)

Zitieren

APA

Pitts, J., Hänsch, R., Roger, Y., Hoffmann, A., & Menzel, H. (2025). 3D Porous Polycaprolactone with Chitosan-Graft-PCL Modified Surface for In Situ Tissue Engineering. Polymers, 17(3), 383. https://doi.org/10.3390/polym17030383

Vancouver

Pitts J, Hänsch R, Roger Y, Hoffmann A, Menzel H. 3D Porous Polycaprolactone with Chitosan-Graft-PCL Modified Surface for In Situ Tissue Engineering. Polymers. 2025;17(3):383. doi:10.3390/polym17030383

BibTeX
@article{Pitts2025,
  author = {Pitts, Johannes and Hänsch, Robert and Roger, Yvonne and Hoffmann, Andrea and Menzel, Henning},
  title = {3D Porous Polycaprolactone with Chitosan-Graft-PCL Modified Surface for In Situ Tissue Engineering},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {3},
  pages = {383},
  doi = {10.3390/polym17030383}
}
Kostenlos starten →