Closed-Loop Recycling of Poly(vinyl butyral) Interlayer Film via Restabilization Technology
Polymers · 24.01.2025 · 17 (3) · 317
DOI: 10.3390/polym17030317 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.01.2025. Verfasst von Vasilis Nikitakos und 8 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Polymer Technology, School of Chemical Engineering, Zographou Campus, National Technical University of Athens, 15780 Athens, Greece. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Health and Digital Executive Agency, The SUNRISE project.
Abstract (Originalsprache)
Polyvinyl butyral (PVB) is a specialty polymer primarily used as an interlayer in laminated glass applications with no current circularity plan after the end of its life. This study presents a comprehensive recycling strategy for postconsumed PVB wastes based on a remelting–restabilization approach. Thermo-oxidative degradation of PVB was analyzed under heat and shear stress conditions in an internal mixer apparatus. The degradation mechanism of plasticized PVB (p-PVB) and unplasticized PVB (u-PVB) was identified as chain scission through melt flow rate (MFR), intrinsic viscosity (IV), and yellowness index (YI) characterization. Six different antioxidant (AO) formulations were screened for their effectiveness in inhibiting degradation in both neat u-PVB and p-PVB, as well as retrieved PVB. The phenolic antioxidants 1,3,5-trimethyl-2,4,6-tris(3,5-di-tert-butyl-4-hydroxybenzyl)benzene and 4-[[4,6-bis(octylsulfanyl)-1,3,5-triazin-2-yl]amino]-2,6-di-tert-butylphenol were found to be the most effective ones based on MFR, oxidation onset temperature (OOT), and YI evaluations, while the optimal AO concentration was determined at 0.3% w/w. Furthermore, upscaling of the process was achieved by mixing virgin PVB and high-quality retrieved PVB wastes with AOs in a twin-screw extruder. Testing of the recycled samples confirmed that the selected AOs offered resilience against degradation at reprocessing and protection during the next service life of the material.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Polymer Technology, School of Chemical Engineering, Zographou Campus, National Technical University of Athens, 15780 Athens, Greece.
- Laboratory of Materials Science & Engineering, School of Chemical Engineering, Zographou Campus, National Technical University of Athens, 15780 Athens, Greece.
- Fraunhofer Institute for Structural Durability and System Reliability LBF, Division Plastics, 64289 Darmstadt, Germany.
- LUREDERRA Technological Centre, Perguita Industrial Area, 31210 Los Arcos, Spain.
- Bio-mi Društvo s Ograničenom Odgovornošću za Proizvodnju, Istraživanje i Razvoj, Put Brdo, 51211 Matulji, Croatia.
ORCID-Profile: Athanasios D Porfyris, Constantine D Papaspyrides
Förderung
- European Health and Digital Executive Agency
- The SUNRISE project
Zitieren
APA
Nikitakos, V., Porfyris, A. D., Beltsios, K., Pfaendner, R., Yecora, B., Perez, A., Brkić, F., Miketa, F., & Papaspyrides, C. D. (2025). Closed-Loop Recycling of Poly(vinyl butyral) Interlayer Film via Restabilization Technology. Polymers, 17(3), 317. https://doi.org/10.3390/polym17030317
Vancouver
Nikitakos V, Porfyris AD, Beltsios K, Pfaendner R, Yecora B, Perez A, et al. Closed-Loop Recycling of Poly(vinyl butyral) Interlayer Film via Restabilization Technology. Polymers. 2025;17(3):317. doi:10.3390/polym17030317
BibTeX
@article{Nikitakos2025,
author = {Nikitakos, Vasilis and Porfyris, Athanasios D and Beltsios, Konstantinos and Pfaendner, Rudolf and Yecora, Beatriz and Perez, Angelica and Brkić, Filip and Miketa, Filip and Papaspyrides, Constantine D},
title = {Closed-Loop Recycling of Poly(vinyl butyral) Interlayer Film via Restabilization Technology},
journal = {Polymers},
year = {2025},
volume = {17},
number = {3},
pages = {317},
doi = {10.3390/polym17030317}
}
EUVIMED