EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Zero Waste Concept in Production of PLA Biocomposites Reinforced with Fibers Derived from Wild Plant (Spartium junceum L.) and Energy Crop (Sida hermaphrodita (L.) Rusby)

Zorana Kovačević iD, Ana Pilipović iD, Mario Meheš iD, Sandra Bischof iD

Polymers · 18.01.2025 · 17 (2) · 235

DOI: 10.3390/polym17020235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.01.2025. Verfasst von Zorana Kovačević und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Textile Technology, University of Zagreb, Prilaz baruna Filipovića 28 a, 10000 Zagreb, Croatia. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 101 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Structural and Investment Funds.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research follows the principles of circular economy through the zero waste concept and cascade approach performed in two steps. Our paper focuses on the first step and explores the characteristics of developed biocomposite materials made from a biodegradable poly(lactic acid) polymer (PLA) reinforced with natural fibers isolated from the second generation of biomass (agricultural biomass and weeds). Two plants, Spartium junceum L. (SJL) and Sida hermaphrodita (SH), were applied. To enhance their mechanical, thermal, and antimicrobial properties, their modification was performed with environmentally friendly additives—linseed oil (LO), organo-modified montmorillonite nanoclay (MMT), milled cork (MC), and zinc oxide (ZnO). The results revealed that SH fibers exhibited 38.92% higher tensile strength than SJL fibers. Composites reinforced with SH fibers modified only with LO displayed a 27.33% increase in tensile strength compared to neat PLA. The addition of LO improved the thermal stability of both biocomposites by approximately 5–7 °C. Furthermore, the inclusion of MMT filler significantly reduced the flammability, lowering the heat release rate to 30.25%, and enabling the categorization of developed biocomposite in a group of flame retardants. In the second step, all waste streams generated during the fibers extraction process are repurposed into the production of solid biofuels (pellets, briquettes) or biogas (bio)methane.

Schlagwörter

Stichwörter der Autor:innen

Sida hermaphrodita (L.) RusbySpartium junceum L.biocompositesmechanical propertiesnanoclaypolylactidethermal properties

Autor:innen und Institutionen

  • Faculty of Textile Technology, University of Zagreb, Prilaz baruna Filipovića 28 a, 10000 Zagreb, Croatia.
  • Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 5, 10002 Zagreb, Croatia.
  • Faculty of Chemical Engineering and Technology, University of Zagreb, Trg Marka Marulića 19, 10000 Zagreb, Croatia.

ORCID-Profile: Zorana Kovačević, Ana Pilipović, Mario Meheš, Sandra Bischof

Förderung

  • European Structural and Investment Funds

Zitieren

APA

Kovačević, Z., Pilipović, A., Meheš, M., & Bischof, S. (2025). Zero Waste Concept in Production of PLA Biocomposites Reinforced with Fibers Derived from Wild Plant (Spartium junceum L.) and Energy Crop (Sida hermaphrodita (L.) Rusby). Polymers, 17(2), 235. https://doi.org/10.3390/polym17020235

Vancouver

Kovačević Z, Pilipović A, Meheš M, Bischof S. Zero Waste Concept in Production of PLA Biocomposites Reinforced with Fibers Derived from Wild Plant (Spartium junceum L.) and Energy Crop (Sida hermaphrodita (L.) Rusby). Polymers. 2025;17(2):235. doi:10.3390/polym17020235

BibTeX
@article{Kovaevi2025,
  author = {Kovačević, Zorana and Pilipović, Ana and Meheš, Mario and Bischof, Sandra},
  title = {Zero Waste Concept in Production of PLA Biocomposites Reinforced with Fibers Derived from Wild Plant (Spartium junceum L.) and Energy Crop (Sida hermaphrodita (L.) Rusby)},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {2},
  pages = {235},
  doi = {10.3390/polym17020235}
}
Kostenlos starten →