Thermal, Mechanical, and Rheological Properties of PLA/PHB Biocomposites Reinforced with Alkaline-Treated Hemp Fibers and Granules
ChemEngineering · 06.11.2025 · 9 (6) · 122
DOI: 10.3390/chemengineering9060122 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemEngineering, online erschienen am 06.11.2025. Verfasst von Zainab Rbihi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Centre de recherche sur les matériaux avancés du Québec, Université du Québec en Abitibi-Témiscamingue, Centre de recherche sur les matériaux avancés.
Abstract (Originalsprache)
This study reports the development of fully biodegradable biocomposites based on polylactic acid (PLA) and polyhydroxybutyrate (PHB) reinforced with alkaline-treated hemp fibers and granules. The thermal, mechanical, dynamic mechanical, and rheological properties of the composites were investigated to assess the influence of reinforcement morphology and content. Differential scanning calorimetry (DSC) confirmed that hemp fibers acted as more effective nucleating agents than granules, increasing the degree of crystallinity of the PLA/PHB blend. Thermal conductivity analysis revealed that hemp incorporation does not systematically improve heat transfer: while long fibers slightly enhanced conductivity, several granule-based composites exhibited lower values than the neat blend. Tensile testing showed that all reinforced samples had lower tensile strength than the neat PLA/PHB matrix, although stiffness was increased, particularly for fiber-based composites. In contrast, flexural strength was maximized in granule-reinforced systems, notably PLA/PHB-2–10-G and PLA/PHB-0.5–10-G, while fibers preserved or improved ductility. Dynamic mechanical analysis confirmed the viscoelastic nature of all composites, with reduced tan δ compared to the neat blend. Rheological testing demonstrated that most composites exhibited lower G′ and complex viscosity than the neat PLA/PHB blend, except for PLA/PHB-2–10-G, which showed stronger matrix–filler interactions. Overall, the results highlight that the performance of PLA/PHB/hemp biocomposites is formulation-dependent, and the selection of hemp morphology and content is crucial for tailoring properties to specific applications.
Förderung
- Centre de recherche sur les matériaux avancés du Québec
- Université du Québec en Abitibi-Témiscamingue
- Centre de recherche sur les matériaux avancés
Zitieren
APA
Rbihi, Z., Erchiqui, F., Rodrigue, D., & Kaddami, H. (2025). Thermal, Mechanical, and Rheological Properties of PLA/PHB Biocomposites Reinforced with Alkaline-Treated Hemp Fibers and Granules. ChemEngineering, 9(6), 122. https://doi.org/10.3390/chemengineering9060122
Vancouver
Rbihi Z, Erchiqui F, Rodrigue D, Kaddami H. Thermal, Mechanical, and Rheological Properties of PLA/PHB Biocomposites Reinforced with Alkaline-Treated Hemp Fibers and Granules. ChemEngineering. 2025;9(6):122. doi:10.3390/chemengineering9060122
BibTeX
@article{Rbihi2025,
author = {Rbihi, Zainab and Erchiqui, Fouad and Rodrigue, Denis and Kaddami, Hamid},
title = {Thermal, Mechanical, and Rheological Properties of PLA/PHB Biocomposites Reinforced with Alkaline-Treated Hemp Fibers and Granules},
journal = {ChemEngineering},
year = {2025},
volume = {9},
number = {6},
pages = {122},
doi = {10.3390/chemengineering9060122}
}
EUVIMED