EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Fused Deposition Modeling Process Parameters on Constitutive Model of Hyperelastic Thermoplastic Polyurethane

Lucas Gallup, Mohamed Trabia iD, Brendan O'Toole iD, Youssef Fahmy iD

Polymers · 26.12.2024 · 17 (1) · 26

DOI: 10.3390/polym17010026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.12.2024. Verfasst von Lucas Gallup und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Nevada, Las Vegas, NV 89154, USA. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Nevada, Las Vegas Top Tier Doctoral Graduate Research Assistantship Program., University of Nevada, Las Vegas Top Tier Doctoral Graduate Research Assistantship Program, Howe Foundation to the University of Nevada, Las Vegas.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermoplastic polyurethanes (TPUs) are suited for fused deposition modeling (FDM) of parts that require high levels of flexibility and strength. Predicting the deformation of TPU parts produced using FDM may be difficult, especially under large deformations, as their constitutive models depend on the printing process parameters. The lack of understanding led to the absence of constitutive models for TPU parts produced using FDM. This work aims to identify accurate hyperelastic constitutive models. Six groups of uniaxial tensile specimens were produced using FDM. These groups were made with variations in two process parameters, which were infill geometry and extrusion nozzle temperature. Infill geometries either corresponded to a zero-deposition angle (wall-only) or an infill deposition of ±45° raster angle (infill-only). It was determined that a third-order Mooney–Rivlin constitutive model can accurately describe these six groups. A finite element analysis (FEA) of the experiments using the proposed constitutive models resulted in limited errors for all groups. The proposed approach was verified through a combination of experiments and FEA of FDM TPU components undergoing large deformation.

Schlagwörter

Stichwörter der Autor:innen

3D printingconstitutive modelsfused deposition modeling (FDM)hyperelasticthermoplastic polyurethane

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Nevada, Las Vegas, NV 89154, USA.

ORCID-Profile: Mohamed Trabia, Brendan O'Toole, Youssef Fahmy

Förderung

  • University of Nevada, Las Vegas Top Tier Doctoral Graduate Research Assistantship Program.
  • University of Nevada, Las Vegas Top Tier Doctoral Graduate Research Assistantship Program
  • Howe Foundation to the University of Nevada, Las Vegas

Zitieren

APA

Gallup, L., Trabia, M., O'Toole, B., & Fahmy, Y. (2024). Influence of Fused Deposition Modeling Process Parameters on Constitutive Model of Hyperelastic Thermoplastic Polyurethane. Polymers, 17(1), 26. https://doi.org/10.3390/polym17010026

Vancouver

Gallup L, Trabia M, O'Toole B, Fahmy Y. Influence of Fused Deposition Modeling Process Parameters on Constitutive Model of Hyperelastic Thermoplastic Polyurethane. Polymers. 2024;17(1):26. doi:10.3390/polym17010026

BibTeX
@article{Gallup2024,
  author = {Gallup, Lucas and Trabia, Mohamed and O'Toole, Brendan and Fahmy, Youssef},
  title = {Influence of Fused Deposition Modeling Process Parameters on Constitutive Model of Hyperelastic Thermoplastic Polyurethane},
  journal = {Polymers},
  year = {2024},
  volume = {17},
  number = {1},
  pages = {26},
  doi = {10.3390/polym17010026}
}
Kostenlos starten →