Compatibilizer Efficiency in Enhancing Marine Plastic Waste Valorization Through Simulated Recycled Plastic Blends
Polymers · 2024-12-08 · 16 (23) · 3441
DOI: 10.3390/polym16233441 ↗At a glance
Journal article in Polymers, published online on 2024-12-08. Written by Sibele Piedade Cestari and 7 co-authors. Institution: Department of Polymer Engineering, Institute for Polymers and Composites (IPC), Campus de Azurém, University of Minho, 4804-533 Guimarães, Portugal. Cited 11 times so far (Crossref); 51 references. The full text is freely available (open access, CC BY 4.0). Funded by: CCDR-N - North Portugal Regional Coordination and Development Commission under the scope of Programa Operacional Regional do Norte 2014-2020 | NORTE 2020 - Mar…, CCDR-N—North Portugal Regional Coordination and Development Commission.
Abstract (original language)
This study investigated the optimal combination of compatibilizers and stabilizers to enhance the value of marine environment plastic (MEP). The composition of the plastics was analysed, and a simulated recycled plastic blend (sMEP) was prepared based on a simplified composition of actual MEP. Different concentrations of three commercial compatibilizers (C1, C2 and C3) were tested to improve tensile strength. The tensile tests indicated that the blend compatibilized with 10 wt.% C3 (polypropylene grafted with maleic anhydride) exhibited the highest increase in tensile strength. This optimal compatibilization was then combined with two commercial stabilizers and applied to a simulated MEP blend. Scanning electron microscopy images showed that all blends had a continuous polyethylene phase with dispersed poly(ethylene terephthalate) (PET) and polypropylene (PP) droplets. The simulated blend with 10 wt.% C3 exhibited a reduced PET droplet size in the dispersed phase. Differential scanning calorimetry results revealed a decrease in polyethylene crystallinity and an increase in PP crystallinity. The improved properties of the blend were attributed to the effectiveness of the C3 compatibilizer in enhancing the interface between the PP and PET phases. An effective formulation was developed to valorise marine-sourced plastics by leveraging existing scientific knowledge and accessible commercial additives. Applying this enhanced formulation to real MEP not only demonstrated its effectiveness, but also highlighted a practical approach for reducing plastic pollution and supporting circular economy principles, contributing to environmental conservation efforts.
Subjects
Author keywords
Authors and institutions
- Department of Polymer Engineering, Institute for Polymers and Composites (IPC), Campus de Azurém, University of Minho, 4804-533 Guimarães, Portugal.
ORCID profiles: Pedro Veiga Rodrigues, Ana Cristina Ribeiro, Maria Cidália Rodrigues Castro, Vasco Cruz
Funding
- CCDR-N - North Portugal Regional Coordination and Development Commission under the scope of Programa Operacional Regional do Norte 2014-2020 | NORTE 2020 - Mar…
- CCDR-N—North Portugal Regional Coordination and Development Commission
Cite
APA
Piedade Cestari, S., Rodrigues, P. V., Ribeiro, A. C., Castro, M. C. R., Cruz, V., Torres, A. R., Ramos, N., & Machado, A. V. (2024). Compatibilizer Efficiency in Enhancing Marine Plastic Waste Valorization Through Simulated Recycled Plastic Blends. Polymers, 16(23), 3441. https://doi.org/10.3390/polym16233441
Vancouver
Piedade Cestari S, Rodrigues PV, Ribeiro AC, Castro MCR, Cruz V, Torres AR, et al. Compatibilizer Efficiency in Enhancing Marine Plastic Waste Valorization Through Simulated Recycled Plastic Blends. Polymers. 2024;16(23):3441. doi:10.3390/polym16233441
BibTeX
@article{PiedadeCestari2024,
author = {Piedade Cestari, Sibele and Rodrigues, Pedro Veiga and Ribeiro, Ana Cristina and Castro, Maria Cidália Rodrigues and Cruz, Vasco and Torres, Ana Rita and Ramos, Nuno and Machado, Ana Vera},
title = {Compatibilizer Efficiency in Enhancing Marine Plastic Waste Valorization Through Simulated Recycled Plastic Blends},
journal = {Polymers},
year = {2024},
volume = {16},
number = {23},
pages = {3441},
doi = {10.3390/polym16233441}
}
EUVIMED