EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Testing, Experimental Design, and Numerical Analysis of Nanomechanical Properties in Epoxy Hybrid Systems Reinforced with Carbon Nanotubes and Graphene Nanoparticles

Giovanni Spinelli iD, Rosella Guarini, Todor Batakliev iD, Liberata Guadagno iD, Marialuigia Raimondo iD

Polymers · 05.12.2024 · 16 (23) · 3420

DOI: 10.3390/polym16233420 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 05.12.2024. Verfasst von Giovanni Spinelli und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Transport Sciences and Technologies, University of Study "Giustino Fortunato", Via Raffaele Delcogliano 12, 82100 Benevento, Italy. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EU project FURHY, funded by the Horizon Europe program, Horizon Europe program, University “Giustino Fortunato”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hybrid nanocomposites incorporating multiple fillers are gaining significant attention due to their ability to enhance material performance, offering superior properties compared to traditional monophase systems. This study investigates hybrid epoxy-based nanocomposites reinforced with multi-walled carbon nanotubes (MWCNTs) and graphene nanosheets (GNs), introduced at two different weight concentrations of the mixed filler, i.e., 0.1 wt% and 0.5 wt% which are, respectively, below and above the Electrical Percolation Threshold (EPT) for the two binary polymer composites that solely include one of the two nanofillers, with varying MWCNTs:GNs ratios. Mechanical properties, such as contact depth, hardness, and reduced modulus, were experimentally assessed via nanoindentation, while morphological analysis supported the mechanical results. A Design of Experiments (DoE) approach was utilized to evaluate the influence of filler concentrations on the composite’s mechanical performance, and Response Surface Methodology (RSM) was applied to derive a mathematical model correlating the filler ratios with key mechanical properties. The best and worst-performing formulations, based on hardness and contact depth results, were further investigated through detailed numerical simulations using a multiphysics software. After validation considering experimental data, the simulations provided additional insights into the mechanical behavior of the hybrid composites. This work aims to contribute to the knowledge base on hybrid composites and promote the use of computational modeling techniques for optimizing the design and mechanical performance of advanced materials.

Schlagwörter

Stichwörter der Autor:innen

epoxy resinhybrid systemsmechanical propertiesnanoindentation

Autor:innen und Institutionen

  • Faculty of Transport Sciences and Technologies, University of Study "Giustino Fortunato", Via Raffaele Delcogliano 12, 82100 Benevento, Italy.
  • Open Laboratory on Experimental Micro and Nano Mechanics, Institute of Mechanics, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Block 4, 1113 Sofia, Bulgaria.
  • Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy.

ORCID-Profile: Giovanni Spinelli, Todor Batakliev, Liberata Guadagno, Marialuigia Raimondo

Förderung

  • EU project FURHY, funded by the Horizon Europe program
  • Horizon Europe program
  • University “Giustino Fortunato”

Zitieren

APA

Spinelli, G., Guarini, R., Batakliev, T., Guadagno, L., & Raimondo, M. (2024). Testing, Experimental Design, and Numerical Analysis of Nanomechanical Properties in Epoxy Hybrid Systems Reinforced with Carbon Nanotubes and Graphene Nanoparticles. Polymers, 16(23), 3420. https://doi.org/10.3390/polym16233420

Vancouver

Spinelli G, Guarini R, Batakliev T, Guadagno L, Raimondo M. Testing, Experimental Design, and Numerical Analysis of Nanomechanical Properties in Epoxy Hybrid Systems Reinforced with Carbon Nanotubes and Graphene Nanoparticles. Polymers. 2024;16(23):3420. doi:10.3390/polym16233420

BibTeX
@article{Spinelli2024,
  author = {Spinelli, Giovanni and Guarini, Rosella and Batakliev, Todor and Guadagno, Liberata and Raimondo, Marialuigia},
  title = {Testing, Experimental Design, and Numerical Analysis of Nanomechanical Properties in Epoxy Hybrid Systems Reinforced with Carbon Nanotubes and Graphene Nanoparticles},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {23},
  pages = {3420},
  doi = {10.3390/polym16233420}
}
Kostenlos starten →