EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biochar as Sustainable Filler of Recycled Polylactic Acid (PLA): A New Generation of Processable Biocomposites

Chiara Botta, Corinna Maria Grottola iD, Davide Amato iD, Maria Rosaria Acocella iD

Polymers · 29.11.2024 · 16 (23) · 3347

DOI: 10.3390/polym16233347 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.11.2024. Verfasst von Chiara Botta und 3 weiteren Autor:innen. Beteiligte Einrichtung: Agricola Imballaggi S.r.l., 84044 Albanella, Italy. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministero dell'Università e della Ricerca, Ministero dell’Università e della Ricerca.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As an alternative to fossil-based polymers, polylactide acid (PLA) has stimulated a significant research effort in the past few years due to the demand for environmentally friendly products. Even though PLA is considered a sustainable or bio-based material, the long-term degradation in ambient conditions increases the volume of waste at end-of-life. To overcome this issue, PLA waste can be recycled to produce new manufactures; however, this approach does not always ensure the same mechanical properties as the original PLA. This study shows for the first time that adding biochar, a carbon material derived from biomass pyrolysis, enhances the processability and stability of composite recycled PLA. Composites are provided in 1, 2.5, and 5 wt% of the biochar filler, resulting in good processability, a higher modulus of up to 20%, and a higher stability to degradation in the presence of UV aging treatment with respect to the raw material. Additionally, DSC analysis shows a significant nucleation effect induced by the biochar that achieves 30% crystallinity from an essentially amorphous PLA.

Schlagwörter

Stichwörter der Autor:innen

aging treatmentbiocharcompositesnucleation effectrecycled PLAstabilization effect

Autor:innen und Institutionen

  • Agricola Imballaggi S.r.l., 84044 Albanella, Italy.
  • Institute of Sciences and Technologies for Sustainable Energy and Mobility (STEMS), National Research Council (CNR), 80125 Naples, Italy.
  • Department of Chemistry and Biology "A. Zambelli", INSTM Research Unit, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy.

ORCID-Profile: Corinna Maria Grottola, Davide Amato, Maria Rosaria Acocella

Förderung

  • Ministero dell'Università e della Ricerca
  • Ministero dell’Università e della Ricerca

Zitieren

APA

Botta, C., Grottola, C. M., Amato, D., & Acocella, M. R. (2024). Biochar as Sustainable Filler of Recycled Polylactic Acid (PLA): A New Generation of Processable Biocomposites. Polymers, 16(23), 3347. https://doi.org/10.3390/polym16233347

Vancouver

Botta C, Grottola CM, Amato D, Acocella MR. Biochar as Sustainable Filler of Recycled Polylactic Acid (PLA): A New Generation of Processable Biocomposites. Polymers. 2024;16(23):3347. doi:10.3390/polym16233347

BibTeX
@article{Botta2024,
  author = {Botta, Chiara and Grottola, Corinna Maria and Amato, Davide and Acocella, Maria Rosaria},
  title = {Biochar as Sustainable Filler of Recycled Polylactic Acid (PLA): A New Generation of Processable Biocomposites},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {23},
  pages = {3347},
  doi = {10.3390/polym16233347}
}
Kostenlos starten →