EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Stereolithography Additively Manufactured Components for Deviations in Dimensional and Geometrical Features

Aknur Kalilayeva iD, Danial Zhumashev, Dongming Wei iD, Asma Perveen iD, Didier Talamona iD

Polymers · 27.11.2024 · 16 (23) · 3311

DOI: 10.3390/polym16233311 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.11.2024. Verfasst von Aknur Kalilayeva und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mathematics, Nazarbayev University, Qabanbay Batyr Ave. 53, Astana 010000, Kazakhstan. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nazarbayev University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid investment casting (RIC) process requires a 3D-printed pattern to create a ceramic mold. Stereolithography (SLA) is a commonly used 3D printing method for pattern creation due to its ability to print complex shapes with smooth surfaces. The printing parameters can significantly affect the dimensional accuracy of the pattern. This study examines how different build orientations (0°, 45°, and 90°) affect the dimensional accuracy of parts produced using SLA. The specimens were printed using castable wax resin. They were measured to investigate the dimensional deviations using 3D scanning technology to understand the correlation between orientation and accuracy better. It was found that the orientation of the print affects the overall accuracy significantly. Parts printed at a 45° angle generally showed the smallest deviations from their nominal dimensions, except for certain features. For instance, cylindrical features showed deviations improving from −7.28% at 0° to −4.81% at 90°, while spherical features had deviations decreasing from −5.01% at 0° to −2.46% at 90°. Simple features, such as holes, exhibited minimal deviation across orientations, with the smallest error observed at 45° (1.98%). These results demonstrate different features and build orientations can affect the accuracy of the printed part differently. To ensure better accuracy, parts printed in different build orientations will require varying amounts of compensation during the design stage. By managing build orientations and controlling the inherent limitations of SLA, users can improve the print’s accuracy and meet quality standards more effectively. Research results can help industries optimize print settings and reduce dimensional errors.

Schlagwörter

Stichwörter der Autor:innen

3D scanningadditive manufacturingaverage deviationdimensional deviationphotogrammetry

Autor:innen und Institutionen

  • Department of Mathematics, Nazarbayev University, Qabanbay Batyr Ave. 53, Astana 010000, Kazakhstan.
  • Department of Mechanical and Aerospace Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Astana 010000, Kazakhstan.

ORCID-Profile: Aknur Kalilayeva, Dongming Wei, Asma Perveen, Didier Talamona

Förderung

  • Nazarbayev University

Zitieren

APA

Kalilayeva, A., Zhumashev, D., Wei, D., Perveen, A., & Talamona, D. (2024). Investigation of Stereolithography Additively Manufactured Components for Deviations in Dimensional and Geometrical Features. Polymers, 16(23), 3311. https://doi.org/10.3390/polym16233311

Vancouver

Kalilayeva A, Zhumashev D, Wei D, Perveen A, Talamona D. Investigation of Stereolithography Additively Manufactured Components for Deviations in Dimensional and Geometrical Features. Polymers. 2024;16(23):3311. doi:10.3390/polym16233311

BibTeX
@article{Kalilayeva2024,
  author = {Kalilayeva, Aknur and Zhumashev, Danial and Wei, Dongming and Perveen, Asma and Talamona, Didier},
  title = {Investigation of Stereolithography Additively Manufactured Components for Deviations in Dimensional and Geometrical Features},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {23},
  pages = {3311},
  doi = {10.3390/polym16233311}
}
Kostenlos starten →