EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Rheological, Mechanical, and Viscoelastic Properties of Silica-Filled SSBR and BR Model Compounds

Anmol Aggarwal iD, Nico Hackel, Fabian Grunert, Sybill Ilisch, Mario Beiner iD, Anke Blume

Polymers · 19.11.2024 · 16 (22) · 3212

DOI: 10.3390/polym16223212 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.11.2024. Verfasst von Anmol Aggarwal und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Elastomer Technology and Engineering, University of Twente, Drienerlolaan 5, 7522 NB Enschede, The Netherlands. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Sachsen-Anhalt / ESF, Synthos Schkopau GmbH, Schkopau, Germany, European social Fund ESF.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Active fillers such as carbon black and silica are added to rubber to improve its mechanical and viscoelastic properties. These fillers cause reinforcement in rubber compounds through physical and/or chemical interactions. Consequently, the compounds’ rheological, mechanical, and viscoelastic behavior are affected. Changing the filler loading influences these properties due to the different interactions (filler-filler and filler-polymer) taking place in the compounds. In addition, rubbers with varying microstructures can interact differently with fillers, and the presence of polymer functionalization to enhance interactions with fillers can further add to the complexity of the network. In this work, the effects of different loadings (0–108 phr/0–25 vol. %) of a highly dispersible grade of silica with three types of solution styrene-butadiene rubbers (SSBR) and one butadiene rubber (BR) on their rheological, mechanical, and viscoelastic properties were investigated. It was observed that the Mooney viscosity and hardness of the compounds increased with an increasing filler loading due to the increasing stiffness of the compounds. Payne effect measurements on uncured compounds provided information about the breakdown of the filler-filler network and the extent of the percolation threshold (15–17.5 vol. %) in all the compounds. At high filler loadings, the properties for BR compounds worsened as compared to SSBR compounds due to weak polymer-filler interaction (strong filler-filler interaction and the lower compatibility of BR with silica). The quasi-static mechanical properties increased with the filler loading and then decreased, thus indicating an optimum filler loading. In strain sweeps on cured rubber compounds by dynamic shear measurements, it was observed that the type of rubber, the filler loading, and the temperature had significant influences on the number of glassy rubber bridges in the filler network and, thus, a consequential effect on the load-bearing capacity and energy dissipation of the rubber compounds.

Schlagwörter

Stichwörter der Autor:innen

BRSSBRfunctionalized polymersmechanical and dynamic propertiessilanesilicaviscoelasticity

Autor:innen und Institutionen

  • Department of Elastomer Technology and Engineering, University of Twente, Drienerlolaan 5, 7522 NB Enschede, The Netherlands.
  • IMWS Institute for Microstructure of Materials and Systems, Walter-Hülse-Straße 1, 06120 Halle (Saale), Germany.
  • Faculty for Natural Sciences II, Martin-Luther-University Halle-Wittenberg, Heinrich-Damerow-Str. 3, 06120 Halle (Saale), Germany.
  • Synthos Schkopau GmbH, Str. E 17, 06258 Schkopau, Germany.

ORCID-Profile: Anmol Aggarwal, Mario Beiner

Förderung

  • State Sachsen-Anhalt / ESF
  • Synthos Schkopau GmbH, Schkopau, Germany
  • European social Fund ESF

Zitieren

APA

Aggarwal, A., Hackel, N., Grunert, F., Ilisch, S., Beiner, M., & Blume, A. (2024). Investigation of Rheological, Mechanical, and Viscoelastic Properties of Silica-Filled SSBR and BR Model Compounds. Polymers, 16(22), 3212. https://doi.org/10.3390/polym16223212

Vancouver

Aggarwal A, Hackel N, Grunert F, Ilisch S, Beiner M, Blume A. Investigation of Rheological, Mechanical, and Viscoelastic Properties of Silica-Filled SSBR and BR Model Compounds. Polymers. 2024;16(22):3212. doi:10.3390/polym16223212

BibTeX
@article{Aggarwal2024,
  author = {Aggarwal, Anmol and Hackel, Nico and Grunert, Fabian and Ilisch, Sybill and Beiner, Mario and Blume, Anke},
  title = {Investigation of Rheological, Mechanical, and Viscoelastic Properties of Silica-Filled SSBR and BR Model Compounds},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {22},
  pages = {3212},
  doi = {10.3390/polym16223212}
}
Kostenlos starten →