EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laboratory Investigation of High-Temperature Rheological and Mechanical Properties of HDPE-Modified Bitumen

Pooya Afkhamy Meybodi, Mohammad Mehdi Khabiri, Mehdi Entezam

Infrastructures · 19.12.2025 · 11 (1) · 1

DOI: 10.3390/infrastructures11010001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 19.12.2025. Verfasst von Pooya Afkhamy Meybodi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yazd University, Iran.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the critical challenge of permanent deformation in asphalt pavements under high-temperature conditions by developing recycled high-density polyethylene (HDPE)-modified bitumen. Through systematic laboratory investigation, we quantified the dose-dependent effects of HDPE (2–9% wt.) on rheological and mechanical properties. Dynamic shear rheometry revealed a 472% increase in rutting resistance (G*/sinδ = 6.48 kPa) at 6% HDPE versus unmodified bitumen (1.13 kPa), alongside an 18–32% reduction in phase angle (58–88 °C). Rotational viscosity surged by 240% at 135 °C (1170 cP vs. 344 cP). Mechanically, Marshall Stability peaked at 19,000 N (46% enhancement) with 6% HDPE, while flow values minimized at 2.3 mm (15% reduction). Complementary tests confirmed superior temperature susceptibility control: penetration decreased by 50% and softening point increased by 43% (72.3 °C) at 9% HDPE, with Penetration Index shifting from −0.4 to +2.18. SEM microstructural analysis validated optimal polymer dispersion at 6%, forming a continuous reinforcing network, whereas agglomeration at higher doses induced defects. Statistical modeling identified a robust linear relationship for Marshall Quotient (Adjusted R2 = 0.8383). The study establishes 6% HDPE as the optimal dosage, delivering synergistic high-temperature performance enhancement while utilizing recycled plastic. Future work should address long-term aging and field validation for sustainable pavement applications in tropical regions.

Förderung

  • Yazd University, Iran

Zitieren

APA

Meybodi, P. A., Khabiri, M. M., & Entezam, M. (2025). Laboratory Investigation of High-Temperature Rheological and Mechanical Properties of HDPE-Modified Bitumen. Infrastructures, 11(1), 1. https://doi.org/10.3390/infrastructures11010001

Vancouver

Meybodi PA, Khabiri MM, Entezam M. Laboratory Investigation of High-Temperature Rheological and Mechanical Properties of HDPE-Modified Bitumen. Infrastructures. 2025;11(1):1. doi:10.3390/infrastructures11010001

BibTeX
@article{Meybodi2025,
  author = {Meybodi, Pooya Afkhamy and Khabiri, Mohammad Mehdi and Entezam, Mehdi},
  title = {Laboratory Investigation of High-Temperature Rheological and Mechanical Properties of HDPE-Modified Bitumen},
  journal = {Infrastructures},
  year = {2025},
  volume = {11},
  number = {1},
  pages = {1},
  doi = {10.3390/infrastructures11010001}
}
Kostenlos starten →