EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Three-Dimensionally-Printed Polymer and Composite Materials for Dental Applications with Focus on Orthodontics

Daniela Tichá iD, Juraj Tomášik iD, Ľubica Oravcová iD, Andrej Thurzo iD

Polymers · 12.11.2024 · 16 (22) · 3151

DOI: 10.3390/polym16223151 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 12.11.2024. Verfasst von Daniela Tichá und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics, Regenerative and Forensic Dentistry, Faculty of Medicine, Comenius University in Bratislava, 81102 Bratislava, Slovakia. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Cultural and Educational Grant Agency of the Ministry of Education and Science of the Slovak Republic (KEGA), Slovak Research and Development Agency grant -APVV, Slovak Research and Development Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing has transformed dentistry by enabling the production of customized dental restorations, aligners, surgical guides, and implants. A variety of polymers and composites are used, each with distinct properties. This review explores materials used in 3D printing for dental applications, focusing on trends identified through a literature search in PubMed, Scopus, and the Web of Science. The most studied areas include 3D-printed crowns, bridges, removable prostheses, surgical guides, and aligners. The development of new materials is still ongoing and also holds great promise in terms of environmentally friendly technologies. Modern manufacturing technologies have a promising future in all areas of dentistry: prosthetics, periodontology, dental and oral surgery, implantology, orthodontics, and regenerative dentistry. However, further studies are needed to safely introduce the latest materials, such as nanodiamond-reinforced PMMA, PLA reinforced with nanohydroxyapatite or magnesium, PLGA composites with tricalcium phosphate and magnesium, and PEEK reinforced with hydroxyapatite or titanium into clinical practice.

Schlagwörter

Stichwörter der Autor:innen

3D printingalignersbridgescrownsimplantsremovable prosthesessurgical guides

Autor:innen und Institutionen

  • Department of Orthodontics, Regenerative and Forensic Dentistry, Faculty of Medicine, Comenius University in Bratislava, 81102 Bratislava, Slovakia.

ORCID-Profile: Daniela Tichá, Juraj Tomášik, Ľubica Oravcová, Andrej Thurzo

Förderung

  • Cultural and Educational Grant Agency of the Ministry of Education and Science of the Slovak Republic (KEGA)
  • Slovak Research and Development Agency grant -APVV
  • Slovak Research and Development Agency

Zitieren

APA

Tichá, D., Tomášik, J., Oravcová, Ľ., & Thurzo, A. (2024). Three-Dimensionally-Printed Polymer and Composite Materials for Dental Applications with Focus on Orthodontics. Polymers, 16(22), 3151. https://doi.org/10.3390/polym16223151

Vancouver

Tichá D, Tomášik J, Oravcová Ľ, Thurzo A. Three-Dimensionally-Printed Polymer and Composite Materials for Dental Applications with Focus on Orthodontics. Polymers. 2024;16(22):3151. doi:10.3390/polym16223151

BibTeX
@article{Tich2024,
  author = {Tichá, Daniela and Tomášik, Juraj and Oravcová, Ľubica and Thurzo, Andrej},
  title = {Three-Dimensionally-Printed Polymer and Composite Materials for Dental Applications with Focus on Orthodontics},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {22},
  pages = {3151},
  doi = {10.3390/polym16223151}
}
Kostenlos starten →