EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Temperature Control and Rotational and Traverse Speeds on the Mechanical Properties of Friction Stir-Welded Polypropylene Plates

Miguelangel Balaguera, Habib R Zambrano iD, Ramiro J Chamorro Coneo iD, Juan Felipe Santa Marín iD, Jimy Unfried-Silgado iD

Polymers · 05.11.2024 · 16 (22) · 3110

DOI: 10.3390/polym16223110 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 05.11.2024. Verfasst von Miguelangel Balaguera und 4 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería Mecánica, Grupo GIMYP, Universidad del Norte, Km 5 vía Puerto Colombia, Barranquilla 081007, Colombia. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, the effects of temperature and rotational and traverse speeds on the mechanical properties of polypropylene joints that are welded by friction stir welding using a non-rotational shoulder and a heat-assisted welding process is investigated. Tensile properties, microhardness measurements, microscopy observations, and thermal analysis are carried out in the present research to evaluate the effect of the welding parameters on the mechanical properties of welded joints. The experiments are conducted and analyzed by means of a central composite design using an analysis of variance (ANOVA). Variations in pre-heating temperature from 60 °C to 80 °C, rotational speed from 800 to 1500 rpm, and traverse speed from 20 mm/min to 100 mm/min are made for observations. A remarkable joint efficiency of 94% is achieved with joints that are free of discontinuities and defects. The fractured surfaces are observed to identify ductile and brittle zones. The crystallinity is measured, and a correlation between crystallinity and joint strength is discussed. The sample with highest efficiency shows 65% crystallinity and a ratio of 37.9% of ductile zone–total fractured area.

Schlagwörter

Stichwörter der Autor:innen

FSW in polypropylenecrystallinitypolymer weldingpolypropyleneprocessing parameterswelding temperature control

Autor:innen und Institutionen

  • Departamento de Ingeniería Mecánica, Grupo GIMYP, Universidad del Norte, Km 5 vía Puerto Colombia, Barranquilla 081007, Colombia.
  • School of Mechanical Engineering, University of Campinas, Rua Mendeleyev, 200, Cidade Univesitaria Zeferino Vaz, Campinas 13083-840, SP, Brazil.
  • Departamento de Ingeniería Mecaníca, Universidad Nacional de Colombia-Sede Medellín, Carrera 64C No. 63-120, Medellín 050034, Colombia.
  • Departamento de Ingeniería Mecánica, Grupo ICT, Universidad de Córdoba, Montería 230002, Colombia.

ORCID-Profile: Habib R Zambrano, Ramiro J Chamorro Coneo, Juan Felipe Santa Marín, Jimy Unfried-Silgado

Zitieren

APA

Balaguera, M., Zambrano, H. R., Chamorro Coneo, R. J., Santa Marín, J. F., & Unfried-Silgado, J. (2024). Effect of Temperature Control and Rotational and Traverse Speeds on the Mechanical Properties of Friction Stir-Welded Polypropylene Plates. Polymers, 16(22), 3110. https://doi.org/10.3390/polym16223110

Vancouver

Balaguera M, Zambrano HR, Chamorro Coneo RJ, Santa Marín JF, Unfried-Silgado J. Effect of Temperature Control and Rotational and Traverse Speeds on the Mechanical Properties of Friction Stir-Welded Polypropylene Plates. Polymers. 2024;16(22):3110. doi:10.3390/polym16223110

BibTeX
@article{Balaguera2024,
  author = {Balaguera, Miguelangel and Zambrano, Habib R and Chamorro Coneo, Ramiro J and Santa Marín, Juan Felipe and Unfried-Silgado, Jimy},
  title = {Effect of Temperature Control and Rotational and Traverse Speeds on the Mechanical Properties of Friction Stir-Welded Polypropylene Plates},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {22},
  pages = {3110},
  doi = {10.3390/polym16223110}
}
Kostenlos starten →