EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Microstructures and mechanical properties of friction stir dissimilar AA2024-O/AA6061-T6 welded joints at varying tool rotational speeds

Diana Puspita Sumarno, Mochammad Noer Ilman

Mechanical Engineering for Society and Industry · 30.06.2025 · 5 (1) · 268-275

DOI: 10.31603/mesi.13499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mechanical Engineering for Society and Industry, online erschienen am 30.06.2025. Verfasst von Diana Puspita Sumarno und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Friction Stir Welding (FSW) is an innovative solid-state welding technique, especially for joints of unweldable metals or even dissimilar metals. In this study, FSW processes of two dissimilar metals, namely AA2024-O and AA6061-T6, were done at different tool rotational speeds of 910, 1500, and 2280 rpm whilst the welding speed was kept constant at 30 mm/min. This research was intended to improve the mechanical properties of the dissimilar FSW joints. A cylindrical pin-equipped tool was selected, and it was tilted at an angle of 2o during welding. Afterwards, microstructural observations, microhardness, and tensile tests were done. Results demonstrated that increasing tool rotation increased the peak temperature, accompanied by better mixing of different metals in the weld nugget zone (WNZ), hence resulting in improved microstructural homogeneity. The hardness distributions for all dissimilar FSW joints were characterized by the appearance of a high hardness region in the central part of WNZ, resulting in a peak of hardness. It was obtained that the FSW joint at 1500 rpm revealed the best ultimate tensile strength (UTS) around 170.38 MPa, which could be a result of precipitation hardening combined with a better homogeneity in WNZ.

Zitieren

APA

Sumarno, D. P., & Ilman, M. N. (2025). Microstructures and mechanical properties of friction stir dissimilar AA2024-O/AA6061-T6 welded joints at varying tool rotational speeds. Mechanical Engineering for Society and Industry, 5(1), 268-275. https://doi.org/10.31603/mesi.13499

Vancouver

Sumarno DP, Ilman MN. Microstructures and mechanical properties of friction stir dissimilar AA2024-O/AA6061-T6 welded joints at varying tool rotational speeds. Mechanical Engineering for Society and Industry. 2025;5(1):268-275. doi:10.31603/mesi.13499

BibTeX
@article{Sumarno2025,
  author = {Sumarno, Diana Puspita and Ilman, Mochammad Noer},
  title = {Microstructures and mechanical properties of friction stir dissimilar AA2024-O/AA6061-T6 welded joints at varying tool rotational speeds},
  journal = {Mechanical Engineering for Society and Industry},
  year = {2025},
  volume = {5},
  number = {1},
  pages = {268--275},
  doi = {10.31603/mesi.13499}
}
Kostenlos starten →