EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Detecting Multi-Scale Defects in Material Extrusion Additive Manufacturing of Fiber-Reinforced Thermoplastic Composites: A Review of Challenges and Advanced Non-Destructive Testing Techniques

Demeke Abay Ashebir iD, Andreas Hendlmeier iD, Michelle Dunn iD, Reza Arablouei iD, Stepan V Lomov iD, Adriano Di Pietro, Mostafa Nikzad

Polymers · 24.10.2024 · 16 (21) · 2986

DOI: 10.3390/polym16212986 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 24.10.2024. Verfasst von Demeke Abay Ashebir und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, Swinburne University of Technology, Hawthorn, VIC 3122, Australia. Die Arbeit wurde bisher 97-mal zitiert (Crossref) und nennt 223 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Victorian Higher Education State Investment Fund (VHESIF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) defects present significant challenges in fiber-reinforced thermoplastic composites (FRTPCs), directly impacting both their structural and non-structural performance. In structures produced through material extrusion-based AM, specifically fused filament fabrication (FFF), the layer-by-layer deposition can introduce defects such as porosity (up to 10–15% in some cases), delamination, voids, fiber misalignment, and incomplete fusion between layers. These defects compromise mechanical properties, leading to reduction of up to 30% in tensile strength and, in some cases, up to 20% in fatigue life, severely diminishing the composite’s overall performance and structural integrity. Conventional non-destructive testing (NDT) techniques often struggle to detect such multi-scale defects efficiently, especially when resolution, penetration depth, or material heterogeneity pose challenges. This review critically examines manufacturing defects in FRTPCs, classifying FFF-induced defects based on morphology, location, and size. Advanced NDT techniques, such as micro-computed tomography (micro-CT), which is capable of detecting voids smaller than 10 µm, and structural health monitoring (SHM) systems integrated with self-sensing fibers, are discussed. The role of machine-learning (ML) algorithms in enhancing the sensitivity and reliability of NDT methods is also highlighted, showing that ML integration can improve defect detection by up to 25–30% compared to traditional NDT techniques. Finally, the potential of self-reporting FRTPCs, equipped with continuous fibers for real-time defect detection and in situ SHM, is investigated. By integrating ML-enhanced NDT with self-reporting FRTPCs, the accuracy and efficiency of defect detection can be significantly improved, fostering broader adoption of AM in aerospace applications by enabling the production of more reliable, defect-minimized FRTPC components.

Schlagwörter

Stichwörter der Autor:innen

continuous fiber-reinforced thermoplasticsmachine learningmanufacturing defectsnon-destructive testingself-reportingstructural health monitoring

Autor:innen und Institutionen

  • School of Engineering, Swinburne University of Technology, Hawthorn, VIC 3122, Australia.
  • Aerostructures Innovation Research Hub (AIR Hub), Swinburne University of Technology, Hawthorn, VIC 3122, Australia.
  • School of Science, Computing and Engineering Technologies, Swinburne University of Technology, Hawthorn, VIC 3122, Australia.
  • Data61, Commonwealth Scientific and Industrial Research Organisation, Pullenvale, QLD 4069, Australia.
  • Department of Materials Engineering, KU Leuven, 3001 Leuven, Belgium.

ORCID-Profile: Demeke Abay Ashebir, Andreas Hendlmeier, Michelle Dunn, Reza Arablouei, Stepan V Lomov

Förderung

  • Victorian Higher Education State Investment Fund (VHESIF)

Zitieren

APA

Ashebir, D. A., Hendlmeier, A., Dunn, M., Arablouei, R., Lomov, S. V., Di Pietro, A., & Nikzad, M. (2024). Detecting Multi-Scale Defects in Material Extrusion Additive Manufacturing of Fiber-Reinforced Thermoplastic Composites: A Review of Challenges and Advanced Non-Destructive Testing Techniques. Polymers, 16(21), 2986. https://doi.org/10.3390/polym16212986

Vancouver

Ashebir DA, Hendlmeier A, Dunn M, Arablouei R, Lomov SV, Di Pietro A, et al. Detecting Multi-Scale Defects in Material Extrusion Additive Manufacturing of Fiber-Reinforced Thermoplastic Composites: A Review of Challenges and Advanced Non-Destructive Testing Techniques. Polymers. 2024;16(21):2986. doi:10.3390/polym16212986

BibTeX
@article{Ashebir2024,
  author = {Ashebir, Demeke Abay and Hendlmeier, Andreas and Dunn, Michelle and Arablouei, Reza and Lomov, Stepan V and Di Pietro, Adriano and Nikzad, Mostafa},
  title = {Detecting Multi-Scale Defects in Material Extrusion Additive Manufacturing of Fiber-Reinforced Thermoplastic Composites: A Review of Challenges and Advanced Non-Destructive Testing Techniques},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {21},
  pages = {2986},
  doi = {10.3390/polym16212986}
}
Kostenlos starten →