Green Recycling of Carbon/Carbon Composites by Solid-State Shear Milling Technology as a Polyamide Multi-Functional Modifier
Polymers · 23.10.2024 · 16 (21) · 2962
DOI: 10.3390/polym16212962 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 23.10.2024. Verfasst von Qianyue Tan und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Lab of Polymer Materials and Engineering, Sichuan University, Chengdu 610065, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Central Government Guide Local Special Fund Project for Scientific and Technological Devel-opment of Shandong Province.
Abstract (Originalsprache)
Carbon/carbon (C/C) composite materials are widely used in aerospace, the military and nuclear energy. The outstanding mechanical qualities of C/C composites mean that they are difficult to crush and recycle using traditional technology. The current recycling methods primarily involve stacking and landfill disposal. Therefore, achieving efficient and environmentally friendly recycling of carbon/carbon (C/C) composites is an urgent and challenging issue. In this work, we reported a simple high-value recycling approach for carbon–carbon frictional composite material (CFCM). The solid-state shear milling (S3M) technology is employed to achieve ultrafine milling of carbon matrices in carbon/carbon (C/C) composite materials while preserving carbon fibers. By this means, carbon fibers and the carbon matrix were mainly split, and the prepared composite powder had combined functionalities of conductivity, thermal conductivity, reinforcement, and wear resistance. The experimental results showed that the tensile strength of the material increased from 64.35 MPa to 72.79 MPa after being compounded with PA6, and the thermal conductivity increased from 0.211 W/mK to 0.611 W/mK. The friction coefficient was reduced from 0.51 to 0.36, a reduction of 25.4%, and the heat deflection temperature was increased from 47.2 °C to 108.2 °C. The S3M technique proposed in this work is an efficient, high-value, and scalable recycling strategy for CFCM, which can be used to produce value-added products and has great application prospects.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Lab of Polymer Materials and Engineering, Sichuan University, Chengdu 610065, China.
- Xi'an Yuanchuang Aviation Technology Co., Ltd., Xi'an 710061, China.
Förderung
- National Natural Science Foundation of China
- Central Government Guide Local Special Fund Project for Scientific and Technological Devel-opment of Shandong Province
Zitieren
APA
Tan, Q., Lai, S., Xue, L., Liu, H., & Bai, S. (2024). Green Recycling of Carbon/Carbon Composites by Solid-State Shear Milling Technology as a Polyamide Multi-Functional Modifier. Polymers, 16(21), 2962. https://doi.org/10.3390/polym16212962
Vancouver
Tan Q, Lai S, Xue L, Liu H, Bai S. Green Recycling of Carbon/Carbon Composites by Solid-State Shear Milling Technology as a Polyamide Multi-Functional Modifier. Polymers. 2024;16(21):2962. doi:10.3390/polym16212962
BibTeX
@article{Tan2024,
author = {Tan, Qianyue and Lai, Shuangxin and Xue, Liang and Liu, Haiping and Bai, Shibing},
title = {Green Recycling of Carbon/Carbon Composites by Solid-State Shear Milling Technology as a Polyamide Multi-Functional Modifier},
journal = {Polymers},
year = {2024},
volume = {16},
number = {21},
pages = {2962},
doi = {10.3390/polym16212962}
}
EUVIMED