Preparation and Performance of PBAT/PLA/CaCO3 Composites via Solid-State Shear Milling Technology
Polymers · 20.10.2024 · 16 (20) · 2942
DOI: 10.3390/polym16202942 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 20.10.2024. Verfasst von Xuehua Jia und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key R&D Program of China, the Program of Innovative Research Team for Young Scientists of Sichuan Province, National Key Research and Development Program of China.
Abstract (Originalsprache)
Replacing traditional disposable, non-biodegradable plastic packaging with biodegradable plastic packaging is one of the key approaches to address the issue of “white pollution”. PBAT/PLA/inorganic filler composites are widely utilized as a biodegradable material, commonly employed in the field of packaging films. However, the poor dispersion of inorganic fillers in the polymer matrix and the limited compatibility between PBAT and PLA have led to inferior mechanical properties and elevated costs. In this work, we propose a simple and effective strategy to improve the dispersion of nano-CaCO3 in a PBAT/PLA matrix through solid-state shear- milling (S3M) technology, combined with mechanochemical modification and in situ compatibilization to enhance the compatibility between PBAT and PLA. The impact of varying milling conditions on the structure and performance of the PBAT/PLA/CaCO3 composites was investigated. During the milling process, PBAT and PLA undergo partial molecular chain fragmentation, generating more active functional groups. In the presence of the chain extender ADR during melt blending, more branched PBAT-g-PLA is formed, thereby enhancing matrix compatibility. The results indicate that the choice of milling materials significantly affects the structure and properties of the composite. The film obtained by milling only PBAT and CaCO3 exhibited the best performance, with its longitudinal tensile strength and fracture elongation reaching 22 MPa and 437%, respectively. This film holds great potential for application in the field of green packaging.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China.
- Sinopec (Beijing) Research Institute of Chemical and Industry Co., Ltd., Beijing 100013, China.
ORCID-Profile: Yinghong Chen, Ning Chen
Förderung
- the National Key R&D Program of China
- the Program of Innovative Research Team for Young Scientists of Sichuan Province
- National Key Research and Development Program of China
- Sichuan Youth Science and Technology Innovation Research Team Project
Zitieren
APA
Jia, X., Wen, Q., Sun, Y., Chen, Y., Gao, D., Ru, Y., & Chen, N. (2024). Preparation and Performance of PBAT/PLA/CaCO3 Composites via Solid-State Shear Milling Technology. Polymers, 16(20), 2942. https://doi.org/10.3390/polym16202942
Vancouver
Jia X, Wen Q, Sun Y, Chen Y, Gao D, Ru Y, et al. Preparation and Performance of PBAT/PLA/CaCO3 Composites via Solid-State Shear Milling Technology. Polymers. 2024;16(20):2942. doi:10.3390/polym16202942
BibTeX
@article{Jia2024,
author = {Jia, Xuehua and Wen, Qilin and Sun, Yanjun and Chen, Yinghong and Gao, Dali and Ru, Yue and Chen, Ning},
title = {Preparation and Performance of PBAT/PLA/CaCO3 Composites via Solid-State Shear Milling Technology},
journal = {Polymers},
year = {2024},
volume = {16},
number = {20},
pages = {2942},
doi = {10.3390/polym16202942}
}
EUVIMED