EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid Carbon Black/Silica Reinforcing System for High-Performance Green Tread Rubber

Muhua Zou, Wenke Gao, Zengcai Li, Binghua Liu, Bingxiang Li, Kai Liu, Jinhui Liu

Polymers · 30.09.2024 · 16 (19) · 2762

DOI: 10.3390/polym16192762 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.09.2024. Verfasst von Muhua Zou und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science and Tec…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silica, as a high-quality reinforcing filler, can satisfy the requirements of high-performance green tread rubber with high wet-skid resistance, low rolling resistance, and low heat generation. However, the silica surface contains abundant silicon hydroxyl groups, resulting in a severe aggregation of silica particles in non-polar rubber matrix. Herein, we explored a carbon black (CB)/silica hybrid reinforcing strategy to prepare epoxidized natural rubber (ENR)-based vulcanizates. Benefiting from the reaction and interaction between the epoxy groups on ENR chains and the silicon hydroxyl groups on silica surfaces, the dispersion uniformity of silica in the ENR matrix was significantly enhanced. Meanwhile, the silica can facilitate the dispersity and reinforcing effect of CB particles in the ENR matrix. By optimizing the CB/silica blending ratios, we realized high-performance ENR vulcanizates with simultaneously improved mechanical strength, wear resistance, resilience, anti-aging, and damping properties, as well as reduced heat generation and rolling resistance. For example, compared with ENR vulcanizates with only CB fillers, those with CB/silica hybrid fillers showed ~10% increase in tensile strength, ~20% increase in elongation at break, and ~20% increase in tensile retention rate. These results indicated that the ENR compounds reinforced with CB/silica hybrid fillers are a promising candidate for high-performance green tread rubber materials.

Schlagwörter

Stichwörter der Autor:innen

carbon blackdispersion uniformityhigh-performance green tirehybrid reinforcing fillerssilica

Autor:innen und Institutionen

  • Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science and Technology, Qingdao 266042, China.
  • Qingdao Dongyi Heating Management Co., Ltd., Qingdao 266100, China.
  • The Yellow River Delta Chambroad Institute Co., Ltd., Binzhou 256500, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zou, M., Gao, W., Li, Z., Liu, B., Li, B., Liu, K., & Liu, J. (2024). Hybrid Carbon Black/Silica Reinforcing System for High-Performance Green Tread Rubber. Polymers, 16(19), 2762. https://doi.org/10.3390/polym16192762

Vancouver

Zou M, Gao W, Li Z, Liu B, Li B, Liu K, et al. Hybrid Carbon Black/Silica Reinforcing System for High-Performance Green Tread Rubber. Polymers. 2024;16(19):2762. doi:10.3390/polym16192762

BibTeX
@article{Zou2024,
  author = {Zou, Muhua and Gao, Wenke and Li, Zengcai and Liu, Binghua and Li, Bingxiang and Liu, Kai and Liu, Jinhui},
  title = {Hybrid Carbon Black/Silica Reinforcing System for High-Performance Green Tread Rubber},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {19},
  pages = {2762},
  doi = {10.3390/polym16192762}
}
Kostenlos starten →