Mechanochemical Sulfur Functionalization of Carbon Nanotubes for Partial Replacement of Carbon Black in Tire Tread Rubber
Journal of Polymer Science · 09.11.2025
DOI: 10.1002/pol.20250971 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Polymer Science, online erschienen am 09.11.2025. Verfasst von Mason A. Rhue und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: Division of Civil, Mechanical and Manufacturing Innovation, University of Oklahoma, National Science Foundation.
Abstract (Originalsprache)
This study investigates the effects of partial replacement of carbon black (CB) with carbon nanotubes (CNTs), both sulfur‐functionalized (sCNTs) and unfunctionalized (uCNTs), in a model tire tread rubber formulation. Two CNT grades with different aspect ratios (~150 and ~7000) are functionalized via ball milling with sulfur. uCNTs and sCNTs are incorporated into rubber formulations at a 48CB:6CNT parts per hundred rubber ratio, which is a 25% reduction in total filler amount compared to a CB‐only control. SEM micrographs confirm poor dispersion of CNTs compared to CB, while sCNTs exhibit smaller agglomerates and a more uniform distribution throughout the rubber matrix compared to uCNTs. Long CNTs lead to greater increases in compound stiffness and strength than short CNTs, while sulfur functionalization further improves dispersion and interfacial bonding, resulting in enhanced tensile strength and abrasion resistance. The addition of CNTs speeds vulcanization kinetics, with sCNTs being faster than uCNTs. Dynamic mechanical analysis reveals marginal reductions in rolling resistance for compounds containing sCNTs compared to those containing uCNTs, while traction characteristics are maintained or slightly improved. These results demonstrate the potential for significant reductions in tire tread compound cost and density, supporting the design of lightweight, high‐performance rubber formulations.
Förderung
- Division of Civil, Mechanical and Manufacturing Innovation
- University of Oklahoma
- National Science Foundation
Zitieren
APA
Rhue, M. A., Lassley, B., Bavlnka, C., Crossley, S., & Grady, B. P. (2025). Mechanochemical Sulfur Functionalization of Carbon Nanotubes for Partial Replacement of Carbon Black in Tire Tread Rubber. Journal of Polymer Science. https://doi.org/10.1002/pol.20250971
Vancouver
Rhue MA, Lassley B, Bavlnka C, Crossley S, Grady BP. Mechanochemical Sulfur Functionalization of Carbon Nanotubes for Partial Replacement of Carbon Black in Tire Tread Rubber. Journal of Polymer Science. 2025. doi:10.1002/pol.20250971
BibTeX
@article{Rhue2025,
author = {Rhue, Mason A. and Lassley, Brandon and Bavlnka, Caleb and Crossley, Steven and Grady, Brian P.},
title = {Mechanochemical Sulfur Functionalization of Carbon Nanotubes for Partial Replacement of Carbon Black in Tire Tread Rubber},
journal = {Journal of Polymer Science},
year = {2025},
doi = {10.1002/pol.20250971}
}
EUVIMED