EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tribological Performance of Additive Manufactured PLA-Based Parts

Moises Batista iD, Irene Del Sol iD, Álvaro Gómez-Parra iD, Juan Manuel Vazquez-Martinez iD

Polymers · 06.09.2024 · 16 (17) · 2529

DOI: 10.3390/polym16172529 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.09.2024. Verfasst von Moises Batista und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering and Industrial Design Department, School of Engineering, University of Cadiz, Avda. de la Universidad de Cadiz, 10, E11519 Pue…. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer additive manufacturing has advanced from prototyping to producing essential parts with improved precision and versatility. Despite challenges like surface finish and wear resistance, new materials and metallic reinforcements in polymers have expanded its applications, enabling stronger, more durable parts for demanding industries like aerospace and structural engineering. This research investigates the tribological behaviour of FFF surfaces by integrating copper and aluminium reinforcement particles into a PLA (polylactic acid) matrix. Pin-on-disc tests were conducted to evaluate friction coefficients and wear rates. Statistical analysis was performed to study the correlation of the main process variables. The results confirmed that reinforced materials offer interesting characteristics despite their complex use, with the roughness of the fabricated parts increasing by more than 300%. This leads to an increase in the coefficient of friction, which is related to the variation in the material’s mechanical properties, as the hardness increases by more than 75% for materials reinforced with Al. Despite this, their performance is more stable, and the volume of material lost due to wear is reduced by half. These results highlight the potential of reinforced polymers to improve the performance and durability of components manufactured through additive processes.

Schlagwörter

Stichwörter der Autor:innen

PLAadditive manufacturingadvanced materialspolylactic acidprint parameterstribologywear resistance

Autor:innen und Institutionen

  • Mechanical Engineering and Industrial Design Department, School of Engineering, University of Cadiz, Avda. de la Universidad de Cadiz, 10, E11519 Puerto Real, Spain.

ORCID-Profile: Moises Batista, Irene Del Sol, Álvaro Gómez-Parra, Juan Manuel Vazquez-Martinez

Zitieren

APA

Batista, M., Del Sol, I., Gómez-Parra, Á., & Vazquez-Martinez, J. M. (2024). Tribological Performance of Additive Manufactured PLA-Based Parts. Polymers, 16(17), 2529. https://doi.org/10.3390/polym16172529

Vancouver

Batista M, Del Sol I, Gómez-Parra Á, Vazquez-Martinez JM. Tribological Performance of Additive Manufactured PLA-Based Parts. Polymers. 2024;16(17):2529. doi:10.3390/polym16172529

BibTeX
@article{Batista2024,
  author = {Batista, Moises and Del Sol, Irene and Gómez-Parra, Álvaro and Vazquez-Martinez, Juan Manuel},
  title = {Tribological Performance of Additive Manufactured PLA-Based Parts},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {17},
  pages = {2529},
  doi = {10.3390/polym16172529}
}
Kostenlos starten →