EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Isolation and Characterization of Spherical Cellulose Nanocrystals Extracted from the Higher Cellulose Yield of the Jenfokie Plant: Morphological, Structural, and Thermal Properties

Solomon Estifo Wossine iD, Ganesh Thothadri iD, Habtamu Beri Tufa, Wakshum Mekonnen Tucho iD, Adil Murtaza, Abhilash Edacherian iD, Gulam Mohammed Sayeed Ahmed iD

Polymers · 08.06.2024 · 16 (12) · 1629

DOI: 10.3390/polym16121629 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 08.06.2024. Verfasst von Solomon Estifo Wossine und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Adama Science and Technology University, Adama 1888, Ethiopia. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 96 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through large group Research Proje…, Deanship of Scientific Research at King Khalid University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Scholars are looking for solutions to substitute hazardous substances in manufacturing nanocellulose from bio-sources to preserve the world’s growing environmental consciousness. During the past decade, there has been a notable increase in the use of cellulose nanocrystals (CNCs) in modern science and nanotechnology advancements because of their abundance, biocompatibility, biodegradability, renewability, and superior mechanical properties. Spherical cellulose nanocrystals (J–CNCs) were successfully synthesized from Jenfokie micro-cellulose (J–MC) via sulfuric acid hydrolysis in this study. The yield (up to 58.6%) and specific surface area (up to 99.64 m2/g) of J–CNCs were measured. A field emission gun–scanning electron microscope (FEG-SEM) was used to assess the morphology of the J–MC and J–CNC samples. The spherical shape nanoparticles with a mean nano-size of 34 nm for J–CNCs were characterized using a transmission electron microscope (TEM). X-ray diffraction (XRD) was used to determine the crystallinity index and crystallinity size of J–CNCs, up to 98.4% and 6.13 nm, respectively. The chemical composition was determined using a Fourier transform infrared (FT–IR) spectroscope. Thermal characterization of thermogravimetry analysis (TGA), derivative thermogravimetry (DTG), and differential thermal analysis (DTA) was conducted to identify the thermal stability and cellulose pyrolysis behavior of both J–MC and J–CNC samples. The thermal analysis of J–CNC indicated lower thermal stability than J–MC. It was noted that J–CNC showed higher levels of crystallinity and larger crystallite sizes than J–MC, indicating a successful digestion and an improvement of the main crystalline structure of cellulose. The X-ray diffraction spectra and TEM images were utilized to establish that the nanocrystals’ size was suitable. The novelty of this work is the synthesis of spherical nanocellulose with better properties, chosen with a rich source of cellulose from an affordable new plant (studied for the first time) by stepwise water-retted extraction, continuing from our previous study.

Schlagwörter

Stichwörter der Autor:innen

cellulosecrystallinitymorphological analysisnanocellulosethermal stability

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Adama Science and Technology University, Adama 1888, Ethiopia.
  • Department of Materials Science and Engineering, Adama Science and Technology University, Adama 1888, Ethiopia.
  • Faculty of Science and Technology, University of Stavanger, 4036 Stavanger, Norway.
  • MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, State Key Laboratory for Mechanical Behavior of Materials, School of Physics, Xi'an Jiaotong University, Xi'an 710049, China.
  • Mechanical Engineering Department, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia.
  • Center of Excellence (COE) for Advanced Manufacturing Engineering, Department of Mechanical Engineering, Adama Science and Technology University, Adama 1888, Ethiopia.

ORCID-Profile: Solomon Estifo Wossine, Ganesh Thothadri, Wakshum Mekonnen Tucho, Abhilash Edacherian, Gulam Mohammed Sayeed Ahmed

Förderung

  • The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through large group Research Proje…
  • Deanship of Scientific Research at King Khalid University

Zitieren

APA

Wossine, S. E., Thothadri, G., Tufa, H. B., Tucho, W. M., Murtaza, A., Edacherian, A., & Sayeed Ahmed, G. M. (2024). Isolation and Characterization of Spherical Cellulose Nanocrystals Extracted from the Higher Cellulose Yield of the Jenfokie Plant: Morphological, Structural, and Thermal Properties. Polymers, 16(12), 1629. https://doi.org/10.3390/polym16121629

Vancouver

Wossine SE, Thothadri G, Tufa HB, Tucho WM, Murtaza A, Edacherian A, et al. Isolation and Characterization of Spherical Cellulose Nanocrystals Extracted from the Higher Cellulose Yield of the Jenfokie Plant: Morphological, Structural, and Thermal Properties. Polymers. 2024;16(12):1629. doi:10.3390/polym16121629

BibTeX
@article{Wossine2024,
  author = {Wossine, Solomon Estifo and Thothadri, Ganesh and Tufa, Habtamu Beri and Tucho, Wakshum Mekonnen and Murtaza, Adil and Edacherian, Abhilash and Sayeed Ahmed, Gulam Mohammed},
  title = {Isolation and Characterization of Spherical Cellulose Nanocrystals Extracted from the Higher Cellulose Yield of the Jenfokie Plant: Morphological, Structural, and Thermal Properties},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {12},
  pages = {1629},
  doi = {10.3390/polym16121629}
}
Kostenlos starten →