EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Morphological, Spectroscopic and Thermal Analysis of Cellulose Nanocrystals Extracted from Waste Jute Fiber by Acid Hydrolysis

Md Sohel Rana iD, Md Abdur Rahim, Md Pervez Mosharraf, Md Fazlul Karim Tipu iD, Jakir Ahmed Chowdhury, Mohammad Rashedul Haque iD, Shaila Kabir, Md Shah Amran, Abu Asad Chowdhury iD

Polymers · 20.03.2023 · 15 (6) · 1530

DOI: 10.3390/polym15061530 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.03.2023. Verfasst von Md Sohel Rana und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Pharmaceutical Chemistry, Faculty of Pharmacy, University of Dhaka, Dhaka 1000, Bangladesh. Die Arbeit wurde bisher 89-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Centennial Research Grant (CRG) funded by the University of Dhaka, Dhaka-1000, Bangladesh, the Centennial Research, the University of Dhaka.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Natural cellulose, a sustainable bioresource, is highly abundant in nature. Cellulosic materials, particularly those that explore and employ such materials for industrial use, have recently attracted significant global attention in the field of material science because of the unique properties of cellulose. The hydroxyl groups enable the formation of intra- and inter-molecular hydrogen bonding and the arrangement of cellulose chains in a highly ordered crystalline zone, with the remaining disordered structure referred to as an amorphous region. The crystalline areas of cellulose are well-known as cellulose nanocrystals (CNCs). In the present study, we extracted CNCs from pure cellulose isolated from waste jute fibers by sulfuric acid hydrolysis, followed by characterization. Pure cellulose was isolated from jute fibers by treating with sodium hydroxide (20% w/w) and anthraquinone (0.5%) solution at 170 °C for 2 h, followed by bleaching with chlorine dioxide and hydrogen peroxide solution. CNCs were isolated from pure cellulose by treating with different concentrations (58% to 62%) of sulfuric acid at different time intervals (20 min to 45 min). The FTIR study of the CNCs reveals no peak at 1738 cm−1, which confirms the absence of hemicellulose in the samples. The CNCs obtained after 45 min of acid hydrolysis are rod-shaped, having an average length of 800 ± 100 nm and width of 55 ± 10 nm, with a high crystallinity index (90%). Zeta potential significantly increased due to the attachment of SO42− ions on the surface of CNC from −1.0 mV to about −30 mV, with the increment of the reaction time from 20 min to 45 min, which proved the higher stability of CNC suspension. Crystallinity increased from 80% to 90% when the reaction time was increased from 20 to 45 min, respectively, while a crystallite size from 2.705 to 4.56 nm was obtained with an increment of the acid concentration. Acid hydrolysis enhanced crystallinity but attenuated the temperature corresponding to major decomposition (Tmax) at 260 °C and the beginning of degradation (Ti) at 200 °C due to the attachment of SO42− ions on the surface, which decreased the thermal stability of CNC. The second degradation at 360 °C indicated the stable crystal structure of CNC. The endothermic peak at 255 °C in the DTA study provided evidence of sulfated nanocrystal decomposition and the recrystallization of cellulose I to cellulose II, the most stable structure among the other four celluloses. The proposed easy-to-reproduce method can successfully and efficiently produce CNCs from waste jute fibers in a straightforward way.

Schlagwörter

Stichwörter der Autor:innen

acid hydrolysiscellulose nanocrystalsjuteparticle sizethermal stability

Autor:innen und Institutionen

  • Department of Pharmaceutical Chemistry, Faculty of Pharmacy, University of Dhaka, Dhaka 1000, Bangladesh.
  • Department of Pharmacy, Faculty of Pharmacy, University of Dhaka, Dhaka 1000, Bangladesh.
  • Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Dhaka, Dhaka 1000, Bangladesh.

ORCID-Profile: Md Sohel Rana, Md Fazlul Karim Tipu, Mohammad Rashedul Haque, Abu Asad Chowdhury

Förderung

  • Centennial Research Grant (CRG) funded by the University of Dhaka, Dhaka-1000, Bangladesh
  • the Centennial Research
  • the University of Dhaka

Zitieren

APA

Rana, M. S., Rahim, M. A., Mosharraf, M. P., Tipu, M. F. K., Chowdhury, J. A., Haque, M. R., Kabir, S., Amran, M. S., & Chowdhury, A. A. (2023). Morphological, Spectroscopic and Thermal Analysis of Cellulose Nanocrystals Extracted from Waste Jute Fiber by Acid Hydrolysis. Polymers, 15(6), 1530. https://doi.org/10.3390/polym15061530

Vancouver

Rana MS, Rahim MA, Mosharraf MP, Tipu MFK, Chowdhury JA, Haque MR, et al. Morphological, Spectroscopic and Thermal Analysis of Cellulose Nanocrystals Extracted from Waste Jute Fiber by Acid Hydrolysis. Polymers. 2023;15(6):1530. doi:10.3390/polym15061530

BibTeX
@article{Rana2023,
  author = {Rana, Md Sohel and Rahim, Md Abdur and Mosharraf, Md Pervez and Tipu, Md Fazlul Karim and Chowdhury, Jakir Ahmed and Haque, Mohammad Rashedul and Kabir, Shaila and Amran, Md Shah and Chowdhury, Abu Asad},
  title = {Morphological, Spectroscopic and Thermal Analysis of Cellulose Nanocrystals Extracted from Waste Jute Fiber by Acid Hydrolysis},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1530},
  doi = {10.3390/polym15061530}
}
Kostenlos starten →