Hydrophobic Modification of Pectin Aerogels via Chemical Vapor Deposition
Polymers · 08.06.2024 · 16 (12) · 1628
DOI: 10.3390/polym16121628 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 08.06.2024. Verfasst von Eleni Effraimopoulou und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mines Paris, PSL University, Centre for Processes, Renewable Energy and Energy Systems (PERSEE), 06904 Sophia Antipolis, France. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Pectin aerogels, with very low density (around 0.1 g cm−3) and high specific surface area (up to 600 m2 g−1), are excellent thermal insulation materials since their thermal conductivity is below that of air at ambient conditions (0.025 W m−1 K−1). However, due to their intrinsic hydrophilicity, pectin aerogels collapse when in contact with water vapor, losing superinsulating properties. In this work, first, pectin aerogels were made, and the influence of the different process parameters on the materials’ structure and properties were studied. All neat pectin aerogels had a low density (0.04–0.11 g cm−1), high specific surface area (308–567 m2 g−1), and very low thermal conductivity (0.015–0.023 W m−1 K−1). Then, pectin aerogels were hydrophobized via the chemical vapor deposition of methyltrimethoxysilane using different reaction durations (2 to 24 h). The influence of hydrophobization on material properties, especially on thermal conductivity, was recorded by conditioning in a climate chamber (25 °C, 80% relative humidity). Hydrophobization resulted in the increase in thermal conductivity compared to that of neat pectin aerogels. MTMS deposition for 16 h was efficient for hydrophobizing pectin aerogels in moist environment (contact angle 115°) and stabilizing material properties with no fluctuation in thermal conductivity (0.030 W m−1 K−1) and density for the testing period of 8 months.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mines Paris, PSL University, Centre for Processes, Renewable Energy and Energy Systems (PERSEE), 06904 Sophia Antipolis, France.
- Mines Paris, PSL University, Centre for Materials Forming (CEMEF), UMR CNRS 7635, 06904 Sophia Antipolis, France.
ORCID-Profile: Eleni Effraimopoulou, Julien Jaxel, Tatiana Budtova
Zitieren
APA
Effraimopoulou, E., Jaxel, J., Budtova, T., & Rigacci, A. (2024). Hydrophobic Modification of Pectin Aerogels via Chemical Vapor Deposition. Polymers, 16(12), 1628. https://doi.org/10.3390/polym16121628
Vancouver
Effraimopoulou E, Jaxel J, Budtova T, Rigacci A. Hydrophobic Modification of Pectin Aerogels via Chemical Vapor Deposition. Polymers. 2024;16(12):1628. doi:10.3390/polym16121628
BibTeX
@article{Effraimopoulou2024,
author = {Effraimopoulou, Eleni and Jaxel, Julien and Budtova, Tatiana and Rigacci, Arnaud},
title = {Hydrophobic Modification of Pectin Aerogels via Chemical Vapor Deposition},
journal = {Polymers},
year = {2024},
volume = {16},
number = {12},
pages = {1628},
doi = {10.3390/polym16121628}
}
EUVIMED