EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Research on Low-Cost High-Viscosity Asphalt and Its Performance for Porous Asphalt Pavement

Lei Xia iD, Qidong Su, Lingyan Shan, Fulong Li iD, Dongwei Cao, Jie Lu

Polymers · 2024-05-24 · 16 (11) · 1489

DOI: 10.3390/polym16111489 ↗

At a glance

Journal article in Polymers, published online on 2024-05-24. Written by Lei Xia and 5 co-authors. Institution: School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China. Cited 8 times so far (Crossref); 43 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ministry of Transport Research Institute of Highway Transportation Power Pilot Project, Central Guiding Local Science and Technology Development Fund Project.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

To develop a cost-effective, high-viscosity asphalt for porous asphalt pavement, we utilized SBS, tackifier, and solubilizer as the main raw materials, identified the optimal composition through an orthogonal experiment of three factors and three levels, and prepared a low-cost high-viscosity asphalt. We compared its conventional and rheological properties against those of rubber asphalt, SBS modified asphalt, and matrix asphalt, employing fluorescence microscopy and Fourier transform infrared spectroscopy for microstructural analysis. The results indicate that the optimal formula composition for high-viscosity asphalt was 4–5% styrene-butadiene-styrene (SBS) + 1–2% tackifier +0–3% solubilizer +0.15% stabilizer. The components evenly dispersed and the performances were enhanced with chemical and physical modification. Compared with SBS modified asphalt, rubber asphalt, and matrix asphalt, the softening point, 5 °C ductility, and 60 °C dynamic viscosity of high-viscosity asphalt were significantly improved, while the 175 °C Brookfield viscosity was equivalent to SBS modified asphalt. In particular, the 60 °C dynamic viscosity reaches 383,180 Pa·s. Rheological tests indicate that the high- and low-temperature grade of high-viscosity asphalt reaches 88–18 °C, and that high-viscosity asphalt has the best high-temperature resistance to permanent deformation and low-temperature resistance to cracking. It can save about 30% cost compared to commercially available high-viscosity asphalt, which is conducive to the promotion and application of porous asphalt pavement.

Subjects

Author keywords

cost-effectivehigh performancehigh-viscosity asphaltmodification mechanismporous asphalt pavement

Authors and institutions

  • School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China.
  • Research Institute of Highway Ministry of Transport, Beijing 100088, China.
  • Beijing Evolyzer Co., Ltd., Beijing 102600, China.

ORCID profiles: Lei Xia, Fulong Li

Funding

  • Ministry of Transport Research Institute of Highway Transportation Power Pilot Project
  • Central Guiding Local Science and Technology Development Fund Project

Cite

APA

Xia, L., Su, Q., Shan, L., Li, F., Cao, D., & Lu, J. (2024). Research on Low-Cost High-Viscosity Asphalt and Its Performance for Porous Asphalt Pavement. Polymers, 16(11), 1489. https://doi.org/10.3390/polym16111489

Vancouver

Xia L, Su Q, Shan L, Li F, Cao D, Lu J. Research on Low-Cost High-Viscosity Asphalt and Its Performance for Porous Asphalt Pavement. Polymers. 2024;16(11):1489. doi:10.3390/polym16111489

BibTeX
@article{Xia2024,
  author = {Xia, Lei and Su, Qidong and Shan, Lingyan and Li, Fulong and Cao, Dongwei and Lu, Jie},
  title = {Research on Low-Cost High-Viscosity Asphalt and Its Performance for Porous Asphalt Pavement},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {11},
  pages = {1489},
  doi = {10.3390/polym16111489}
}
Start for free →